-
Anonymous users2024-01-231. First of all, look at the selection of materials for the wardrobe. Professional manufacturers choose environmentally friendly plates that meet national testing standards, while some manufacturers choose inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, the first thing to see is whether the merchant has a plate test report and related test certificates from the national authoritative testing department.
2. Look at the veneer of the plate. Some wardrobes look good on the surface, but in fact, a slight scratch with a fingernail can make obvious scratches. These wardrobes are made of polyflor paper and gorgeous cardboard that are often used in low-cost wardrobes on the market, and the wear resistance is poor.
Professional manufacturers use environmentally friendly veneers with thick dip paint thickness and high temperature and high pressure treatment, with high surface strength, wear resistance and scratch resistance. 3. Look at the edge banding of the plate. Professional manufacturers use precision panel saws to cut plates, and there is no edge collapse around the plates.
After the edge is banded around the perimeter, it effectively prevents moisture in the air from invading the inside of the board. Some manufacturers do not have professional equipment, the cutting is rough, and there are obvious edge collapse around it. Some even cut corners and only did edge sealing on the front side of the plate.
The non-edged surface is easy to absorb moisture in the air, causing the board to expand, causing the wardrobe to deform and affecting the service life. 4. Look at the processing method. 5. Look at the structure of the back plate.
6. See if it is customized for professional home furnishings. 7. Look at hardware accessories. Insulting the country's neighbors.
The main steps for waxing wooden furniture are:
1. When maintaining wooden furniture, the first thing to do is to remove the dust on the surface of the furniture, and when cleaning the dust, you must use two clean cotton cloths, one is wet, and the other is dry. Clean the surface with a damp cotton cloth first, and then use a dry cotton cloth to dry the water stains. The dust must be cleaned, otherwise when waxing, the dust will increase the friction between the cotton cloth and the wooden furniture, and damage its surface. >>>More
That's about it, and then a picture is attached.
>1. The machining process includes the following processes: >>>More
Wood drying, batching, sawing material, planing, scribing, cutting board, pressing plate, punching and tenoning, slotting and starting line, sanding, assembly, blank inspection, floor painting, sanding, spray topcoat, paint inspection, installation, qualified inspection, warehousing, delivery.
Repair refers to the rectification of unqualified products to make the products meet the standards or downgrade the use. The process flow of rework should be determined according to the specific situation of nonconformity, that is, the cause of non-conformity can be analyzed, whether it is a process error or not executed in accordance with the process requirements, so as to determine the process flow of rework.
<1> Because of its moderate price and outstanding advantages, paulownia wood is the preferred material for furniture companies to make drawers and bed boards. Dalian Huafeng Furniture, Langfang Huari Furniture, Dalian Guangming Furniture, Heilongjiang Huahe Home, Dynasty Furniture and other furniture companies are all using paulownia wood to make drawers, bed boards, backboards and other furniture parts. >>>More