How to wax mahogany wood carved furniture

First of all, wipe the furniture with a clean rag, first remove the dust on the surface of the furniture, especially the places that are easy to fall dust. Then use a brush to dip an appropriate amount of Mo Luo and apply gently. Be careful not to be too sticky.

Hold the edges first, and then apply the middle part to avoid leaving too much wax on the edges. After applying the wax, wait 3 to 4 minutes before applying, and wipe off the excess wax with a towel when it is not completely dry.

The maintenance method of mahogany furniture is waxing and lacquering, and the general craftsmen choose waxing.

The essence of mahogany furniture is that it is not painted in any wayInstead, the waxing process is used to maintain the woodiness of the wood itself and the beautiful wood grain. In recent years, mahogany furniture has been made of very old and thick paraffin wax before leaving the factory. It has a distinct waxy feel to the touch, hard, smooth, translucent, and not shiny.

Gives the customer the feeling of new furniture (which has not yet been opened).

The waxing of mahogany furniture is divided into open waxing and closed waxing. Open waxing is to expose the wood eye (needle eye) and wood grain of the wood outside, and the wood of good materials and products with high technology level generally use open waxing to show the grade of handicrafts. Closed waxing is to fill the pores of the wooden eye (needle eye) of the wood to enhance the smoothness, and raw lacquer is generally used, because raw lacquer is environmentally friendly, non-toxic and odorless.

When filling pores, beeswax is used, the wax is first baked and infiltrated into the wood with high temperature, then baked and infiltrated into the wood with an electric heater, and finally wiped smooth with soft cotton cloth and cotton yarn to wipe off the excess wax.

There are five major requirements for waxing mahogany furniture.

First of all, the waxing is transparent, the wax film is very thin, the surface of the wood is not grinded, but the waterproof is good, the wood is not easy to crack, and it plays a closed role, so the material selection requirements for the wood are higher, and the general color requirements are uniform.

Secondly, the waxing of antique mahogany furniture is not as bright as the paint requirements, because the brightness is determined by the wax, and the product is carefully polished and polished and the polishing of the wax still has excellent gloss, but the general customer does not pursue this effect.

Again, after careful polishing, the effect is determined by the thickness of the sand and the thoroughness of the polishing, which is polished with a fine cotton ball to form a crystal clear luster effect and a soft feel.

Subsequently, there are both open and closed options.

Finally, the wood grain is revealed in its original flavor. It is also important to note that the baked wax must completely penetrate the wood, and the temperature of the heat gun must not be too high during the entire operation. The finished furniture should not be scalded and needs to be carefully protected.

The specific method of waxing mahogany wood carved furniture is as follows.

Formal Waxing Steps:

1. Spot wax. The purpose of the preliminary work of the wax is to prepare for the wax to be evenly applied. Specifically, use a wax brush (three or four rows of bristle brushes) to evenly wax each part of the wardrobe surface.

2. Cloth wax. The wax ordered in the previous step is evenly spread out during the heating process.

3. Scalding wax. In the process of scalding wax, the temperature should be small, and the wax should be used less. The wax is melted away during the heat movement, allowing it to slowly penetrate deep into the material.

4. Waxing. First of all, special tools are used, traditional tools are made of horns, for ordinary flat wax shovels, the head can be smoothed; But for the carved parts, it is necessary to have a conical and concave wax shovel. For example, waxing in the parts with lines is convex according to the lines, and the tool is deliberately made into a concave shape to facilitate waxing. In the process of waxing, pay attention to the medicine in one go, the cleaner the waxing, the more delicate and rounded the surface feel.

5. Wipe wax. The traditional technique is to use small coarse cloth and pure cotton cloth to poke and rub along the texture of the furniture like a bath. The friction process has a certain temperature, so that the wax can not be determined, so that the floating wax that has not been shoveled can be removed, and the surface of the furniture can not have a sticky feeling after the wax is wiped, which can achieve the technical effect.

6. Shake the wax. Commonly known as dry bucket wax. It's with a bristle brush. Generally, choose a board brush with black bristles that are 7 8 cm wide and 12 15 cm long and have good hardness, but do not use wild boar bristles, because the hardness is too strong.

Mahogany wood carved furniture formal waxing steps:

1. Spot wax. The purpose of the preliminary work of the wax is to prepare for the wax to be evenly applied. Specifically, use a wax brush (three or four rows of bristle brushes) to evenly wax each part of the wardrobe surface.

2. Cloth wax. The wax ordered in the previous step is evenly spread out during the heating process.

3. Scalding wax. In the process of scalding wax, the temperature should be small, and the wax should be used less. The wax is melted away during the heat movement, allowing it to slowly penetrate deep into the material.

4. Waxing. First of all, special tools are used, traditional tools are made of horns, but in the manufacture of wax shovels of special shapes, wax shovels made of wood of the same material can be used (commonly known as wax drivers), for ordinary flat wax shovels, the head can be smoothed; But for the carved parts, it is necessary to have a conical and concave wax shovel. For example, waxing in the parts with lines is convex according to the lines, and the tool is deliberately made into a concave shape to facilitate waxing. In the waxing process, the medicine should be done in one go, and the purpose is to shovel the floating wax on the surface of the furniture at one time.

It also plays a certain role in the calendering process. The cleaner the waxing, the more delicate and rounded the surface feel.

5. Wipe wax. The traditional technique is to use small coarse cloth and pure cotton cloth to poke and rub along the texture of the furniture like a bath. It should not only be strong but also have a certain speed, so that the friction process has a certain temperature, so that the wax can not be determined, so that the floating wax that has not been shoveled can be removed, and the feel is intuitively the best. After the wax is wiped, the surface of the furniture must not feel sticky, so as to achieve the technical effect.

6. Shake the wax. Commonly known as dry bucket wax. It's with a bristle brush. Generally, choose a board brush with black bristles that are 7 8 cm wide and 12 15 cm long and have good hardness, but do not use wild boar bristles, because the hardness is too strong. Use the brush to shake and wipe all areas clean, including any wax in the crevices.

Three points are worth noting:

1. The baked wax must completely penetrate into the wood;

2. During the whole operation, the temperature of the heat gun should not be too high;

3. After the wax maintenance is completed, it is necessary to avoid scalding and water, and it needs to be carefully protected.

Nowadays, people have a big misunderstanding about waxing, thinking that it is better to wax. This is not the case. Although mahogany is a product with better performance, it is all wood, which will dry out and crack due to weather or other reasons, and waxing actually plays a protective role.

Tool Preparation:

Sandpaper 180, polishing machine, polishing ball, brush, heat gun, wax, cotton, cotton yarn.

Formal Waxing Steps:

1.Spot wax. The purpose of the preliminary work of scalding wax is to make accurate preparations for wiping and coating the wax. Specifically, use a wax brush (three or four rows of bristle brushes) to evenly wax each part of the wardrobe surface.

2.Cloth wax. The wax ordered in the previous step is evenly spread out during the heating process.

3.Hot wax. In the process of scalding wax, the temperature should be small, and the wax should be used less. The wax is melted away during the heat movement, allowing it to slowly penetrate deep into the material.

4.Waxing. First of all, special tools are used, traditional tools are made of horns, but in the manufacture of wax shovels of special shapes, wax shovels made of wood of the same material can be used (commonly known as wax drivers), for ordinary flat wax shovels, the head can be smoothed; But for the carved parts, it is necessary to have a conical and concave wax shovel.

For example, waxing in the parts with lines is ground out of convex socks according to the lines, and the tool is deliberately made into a concave shape to facilitate waxing. In the waxing process, the medicine should be done in one go, and the purpose is to shovel the floating wax on the surface of the furniture at one time. It also plays a certain role in the calendering process.

The cleaner the waxing, the more delicate and rounded the surface feel.

5.Rub wax. The traditional technique is to use small coarse cloth and pure cotton cloth to poke and rub along the texture of the furniture like a bath.

It should not only be strong but also have a certain speed, so that the friction process has a certain temperature, so that the wax can not be determined, so that the floating wax that has not been shoveled can be removed, and the feel is intuitively the best. After the wax is wiped, the surface of the furniture must not feel sticky, so as to achieve the technical effect.

6.Shake the wax. Commonly known as dry bucket wax.

It's with a bristle brush. Generally, choose a board brush with black bristles that are 7 8 cm wide and 12 15 cm long and have good hardness, but do not use wild boar bristles, because the hardness is too strong. Use the brush to shake and wipe all areas clean, including any wax in the crevices.

There are a few points worth noting:

1. The baked wax must completely penetrate into the wood;

2. During the whole operation, the temperature of the heat gun should not be too high;

3. After the wax maintenance is completed, it is necessary to avoid scalding and water, and it needs to be carefully protected.

Nowadays, people have a big misunderstanding about waxing, thinking that it is better to wax.

This is not the case with God Dou.

Although mahogany is a product with better performance, it is all wood, which will dry out and crack due to weather or other reasons, and waxing actually plays a protective role.

New Pufang stay.