How to construct the bathroom to do floor heating

Bypassing the toilet drain is the same as the others.

Jianye first made a layer of waterproofing before construction.

1. First assemble the water collector, according to the location and height determined at home, the water collector is straight and firmly attached to the wall, and fixed with expansion bolts. In order to prevent heat loss, it is necessary to cover the section of pipe from the manifold to the installation room with a special insulation sleeve. Mul.

2. Before starting to lay floor heating, the dust on the surface of the house should be swept away, and if there are concave and convex phenomena or sundries on the ground, they should be cleaned up to ensure the smoothness of the ground. Mul.

3. Use the hot water pipe as the main water pipe for floor heating, and the temperature control line is buried in the place of the water collector, and put some related temperature control lines around it together to facilitate the connection, and the installation should be straight and neat. Mul.

4. The insulation board should be smooth when laying, tight when jointing with each other, and neat when cutting. The reflective film must not be wrinkled. Cover tightly, and there shall be no leakage of insulation board or ground. Mul.

5. The laying of floor heating pipes should be operated according to the actual pipe distance and direction, the pipe spacing should be kept parallel, and the pipe should be fixed on the extruded plastic board or fixed on the steel wire mesh with a strap according to the drawings with plastic nails. Mul.