What is the reason why the toilet does not drain

The water in the toilet is broken or the parts in the toilet are falling off, the pipe design is not optimal, and the paper scraps or other blockages are clogged.

Open the toilet lid to check whether the float sinks to the bottom when the water tank is not water, if it is still above when there is no water, it means that the float is broken, and it cannot sink so that the water outlet is always closed, so there is no water, you can also overhaul other reasons, whether the triangle valve is open, remove the triangle, check whether the end connected with the inner wire in the wall is blocked by the raw material belt, whether the valve core of the empty triangle valve is open and closed normally, whether the water hose is unobstructed, just a little thing, you can exclude it the same, If it is normal, then it is necessary to consider the problem of the water pipe, whether it is welded during construction.

Other workarounds:

1. In fact, it is also simple, and the situation of less water from the faucet is a problem. Even the better toilet bowl has a filter inside, and the filter is blocked by too much limescale for a long time, so that the tap water cannot come in. As long as you can remove the filter and clean it, you can do it.

2. Close the valve on the hose connecting the water inlet of the water tank, or the operation will spray water after a while. Flush the toilet again and drain the remaining water from the tank.

3. Along the water inlet hose, look at the bottom of the toilet, there is a hexagonal nut to connect the hose with the water replenisher in the water tank (a standing plastic pipe) together, turn the nut with a wrench, and then look up along the position of the nut, there may be a nut in the same position, the same turntable, the same function, also unscrewed, my family is plastic, I don't know what else is the same as this. After two processes, the water replenisher can be removed from the inside of the toilet.

4. Remove the water replenisher, see that there is a small square column in the middle of the inner tube, pull it out with needle-nose pliers, you can see that the square column and the filter screen are one, and they come out together.

5. Use a waste toothbrush or the like to clean the filter. It's better to have a scale cleaner, no and it's not a big problem, I just use the scale remover to add water to soak the filter for a while, and it is very clean, and you can also pour some of this mixture into the water filler, and you can also clean the scale inside.

6. Finally, you can install it back as it is.

If you have the sanitary ware inside the tank, it doesn't move. That's blocked.

If it has been moved. That's a different story.

water level, flap. The high bottom is related.

Is the rotation force of the water out of the water enough? If there is little water or the force is not enough, the rubber column under the button is not long enough to push the water pressure underneath.

There are many reasons why the toilet does not drain, and you can check them one by one. Some of them have insufficient water discharge, some have toilet drain pipes that need to be cleaned, some have cast iron bends in old houses, and some water tanks cannot be replenished.

1. The water pressure is too low: What is the reason why the toilet does not pump water, there are many reasons, but the first thing we consider is that the water pressure at home is too low, and then the water does not come, so it does not pump water, which is the easiest fault to shoot.

2. Confetti blockage: We also need to consider whether it is blocked by some confetti or other debris, if so, we can find a way to clean it up in time.

3. It may be that the filter screen is blocked by scale: what is the reason why the toilet does not pump water, we can check whether it is a problem with the filter screen, there is a filter screen in the toilet water filler, and it is easy to be blocked by scale after a long time, and the water cannot be pumped.

4. Inlet and outlet valve failure: The toilet does not pump water to follow up the water valve and the outlet valve have a close relationship, and the potato may be caused by the failure of the inlet and outlet valve.

5. Improper pipe design: If the pipe design of the toilet is not good, there will also be a phenomenon that the toilet does not pump water, and it will be more troublesome to deal with it.