What to do if the toilet does not drain the toilet and the reasons and solutions

Toilet Doesn't Drain Reason:

1. The water pressure at home is too low.

2. Confetti is clogged.

3. The filter screen is clogged with scale.

4. The toilet parts fall off.

5. The inlet and outlet valves are faulty.

6. Improper tube design.

Solution: 1. Buy a soft hook to unblock the pipe to hook up the blockage, so the toilet will naturally be able to drain.

2. Use the hose of the pipe to try to pass down the toilet pipe, try to stir up the blockage, if it is found that it is not good, then it proves that it is not easy to stir the matter, we will change the method.

3. Buy some caustic soda to try, boil the water, melt the caustic soda and pour it into the toilet. After ten minutes, it will be clear.

4. Fill the toilet with water and then use a mop to block the mouth of the toilet, keep lifting it up and then poke it down, the amplitude is not too large, but the action should be strong and fast.

5. The easiest way is to go to the hardware store to buy a suction cup with a handle, and it will naturally pass after a few gasps.

6. If the toilet is blocked by mud or hard objects, we need to use a steel wire that can be bent and straightened to unclog the toilet.

7. We can make a simple tool for dredging the toilet, find a stick of about the same length, wrap a cloth around one end of the stick, and the cloth will be formed into a ball or column around the city, with a diameter slightly larger than the diameter of the toilet drain, and then put on a plastic bag, and then poke it down.

8. If it is a dissolvable thing such as paper scraps or oil that blocks it, we can flush it more or flush it down with a basin of hot water.

Toilet pumping principle.

1. When discharging water, pull the water discharge knob, and the knob pulls up the water outlet plug through the lever, so that the water in the water tank will be released. After the water is released, the outlet plug falls down, blocking the water outlet. At this time, the float is also at the bottom of the tank due to the drop of the water surface.

The fall of the float drives the lever to pull up the water inlet plug and let the water enter the tank.

2. As the water surface rises, the float will gradually increase due to buoyancy until the water inlet plug is pressed down by the lever and the water inlet is blocked. This fills the tank with water again.

3. When the water inlet pipe leaks due to failure, the water level in the water tank will continue to rise, and eventually it will overflow the water tank. And the setting of the seepage pipe solves this problem. When the water level rises to the seepage nozzle, the water flows into the toilet bowl from the seepage pipe and does not allow the water to overflow the tank.

4. When the inlet pipe is working normally, the water surface in the water tank will not reach the seepage nozzle, so there is no need to worry about the water flowing away.