-
Anonymous users2024-01-24Toilet water fixtures are actually quite simple. Water fixtures are all about controlling the amount of water your toilet use. There are two functions. One is the large row, that is, the one that rushes the stool. One is a small chop, that is, a urine rush. It plays a role in saving water. It depends more on the specific water operation.
-
Anonymous users2024-01-23First, the quality of the water in the toilet is quite good, much stronger than the material bought later, so there is no need to change it. However, when installing, it is necessary to layer glass glue underneath to prevent water leakage or excessive moisture.
Second, the toilet is now rarely given flanges, because the general workers do not care about the installation, because of the trouble, but this kind of flange is really useful, so it is recommended to buy a better quality, for which is the quality is really not good evaluation, mainly viscosity, elasticity, thickness, and the price.
Third, many of the toilet seats are now cushioned, that is, there will be no loud sound, and the lid is closed slowly, and this kind of plastic parts are not good or bad, even if TOTO is taken out and Kohler will lose this function for a few years, so as long as it is relatively thick and not rough.
Fourth, the toilet does not send the splayed valve and the snakeskin tube for connection, this part is still bought on the market, because the splayed valve is rarely switched, so the quality of the general can be about 20 yuan enough, the quality of the snakeskin tube is better, thicker, because of the water pressure problem, some bad pipes are easy to burst.
-
Anonymous users2024-01-22Toilet water parts:
Toilet tank fittings are the core part of the toilet, known in the industry as the "heart of the toilet", which is mainly composed of inlet valves, drain valves and buttons. Roughly, it can be divided into two categories: conjoined and split. Siamese fittings are used for Siamese toilets.
Split fittings are used for split toilets. The inlet valve part can be divided into side inlet and bottom inlet, and there is also rear inlet. The drain valve part can be divided into double press type, chain type and bucket type.
The button part can be divided into side buttons, top buttons and front buttons.
-
Anonymous users2024-01-21I have been making sanitary ware for 10 years, and I personally think that the water parts of the toilet refer to the inlet valve and the drain valve in the water tank, and if there are more, the buttons on it should also be.
-
Anonymous users2024-01-20If you need a replacement, you can ask me for help.
-
Anonymous users2024-01-19The toilet water --- is also called "toilet sanitary ware".
It is water ingress, water stopping. Flush something.
Good self-knowing.
ABS engineering plastics. The showers are available in plastic and stainless steel. Anyway, the price verification material. >>>More
Toilets are commonly used by American Standard, Wrigley and some other domestic brands.
The old toilet water parts only need to match the new toilet in terms of the fitting model to be used. Old-fashioned toilet fittings are generally single-button type, large float type is more, large float type is larger, occupies more space, and single-button flush valve has no water-saving function. Generally, there is no fixed replacement cycle for toilets at home. >>>More
Usually tap water, and drinking water is the same, there are also reclaimed water used, you only need to look at how many water inlet pipes in your home to know what kind of water if it is two, that is a drinking water and a reclaimed water, adopt yo.
First, the quality of the water in the toilet is quite good, much stronger than the material bought later, so there is no need to change it. However, when installing, it is necessary to layer glass glue underneath to prevent water leakage or excessive moisture. >>>More