What should I do if the toilet pit distance is small

You can use a shifter, according to the empty distance of 10 cm, the ground is partially heightened, and the PVC elbow is used to change the distance between the drainage holes or directly install a squatting toilet.

At present, the drainage mode of the toilet is mainly divided into two types: horizontal row and ground row, and each discharge mode has different requirements for the toilet pit distance. For example, in the case of horizontal rows, the main flush toilet is used, and the pit distance is controlled at 180mm.

The floor row can be used for both straight flush and siphon toilets, and the pit spacing is 305mm mm, and there are some special toilets that require a pit spacing of about 580mm.

After the installation of S bend in the rear drainage, the flushing capacity is only 40%-60% of the original, which outweighs the loss.

ARE YOU SURE IT'S ONLY 12MM AND NOT 120MM?

IF IT IS 12MM, I SUGGEST THAT THE TOILET PRE-INSTALLED PLACE, BUILD A PLATFORM WITH BRICKS AND CEMENT, WITH A HEIGHT OF 300MM MINUS 12MM EQUAL TO 288MM, BUY A TOILET WITH A PIT DISTANCE OF 300MM, AND USE PVC PIPE TO MAKE A 45-DEGREE INCLINED PIPE, WHICH CAN MINIMIZE THE IMPACT ON THE FLUSHING EFFECT.

If it is 120MM, see if the wall behind the toilet is a load-bearing wall, if not, borrow a little distance from the wall, make up 300MM pits, and oppose the use of shifters and S-bends, although my suggestions above are more troublesome, but there will be no sequelae, detailed suggestions You can also ask the decoration workers you hired.

Buy a toilet with a drain (wall drainage) and just add an elbow.

The rear drain toilet is a good choice, and the other effects are mediocre.

If there is a pit distance converter, go to the building materials market to find it.

Punch a ditch and lead it out with a divided pipe. The shifter may be a bit far away and not easy to use.

Did you write it wrong. 12MM ONLY.

It is best to find a professional master. He'll tell you.

If it is less than 10cm. You can buy a lifter to install, hardware stores sell it, and if the error is large, change the drainage pipe or change the toilet.

THE DISTANCE BETWEEN THE TOILET PIT IS GENERALLY 300 OR 400MM, AND YOU DIDN'T PAY ATTENTION TO THE TOILET WHEN YOU BOUGHT IT, YOU CAN CHANGE THE TOILET, WHICH IS THE BEST AND FASTEST WAY.

Return. Be sure to pick the good ones after the sale.

For example: Eagle Bathroom.

How to repair the leakage of the air conditioner, how to solve the toilet pit distance, come in and communicate.

If the distance between the toilet pit and the pit is small, of course, it cannot only be rebuilt, because it is needed for a long time and cannot be dealt with.

In this case, it depends on the specific situation, but in general, the pit distance between the toilets can be selected, because there are two sizes between them.

Hello! Of course, the toilet should calculate the pit distance, and some are not suitable for the pit spacing to be too small to put down or save much space.

The easiest way is to measure the size first, buy a toilet with a relatively small size, and if you want to restore the original distance, you need to reinstall the sewer pipe.

If the toilet pit distance is small, you can buy a toilet with a suitable size, because some toilets have different pit spacing, so you can buy a smaller one, if the smallest one is relatively small, you can also stretch the gun into it, or redo the wall, in this way, you can also buy a bay mouth for him to change, but this may be more likely to be blocked later.

Hello, in this case, you can only remove the toilet and let the decorator make you a new one.

What to do if the toilet pit spacing is small, if the toilet pit spacing is small, you can expand it for him, and it is okay to expand it a little, and things like this should be solved flexibly.

The hole space is small, and the toilet can only be replaced under normal circumstances, and it is very difficult to change the drainage.

Hello, the pit distance of the toilet is small, you can only choose the toilet with a small distance, there is no other way, choose the toilet installation with the pit distance suitable, thank you.

Generally, the pit spacing is 300, if the pit spacing is too small, it can not be installed, you need to find the pit again, and ask for a suitable re-purchase.

What should I do if the toilet pit distance is smallIt is recommended that you change the toilet, or is there no two eyes on the toilet? You can choose another one.

What to do if the toilet pit spacing is small They are spacing small, so let's turn two into one and make them the same in the middle.

What should I do if the distance between the bucket pit is small, I think you can only buy a small toilet like this, or you can only expand it yourself.

If the pit distance is small, then you must find a suitable toilet, so as to bring some convenience to the later use.

There is no other way to do this, but to change it again, otherwise if you make do with it, it will cause a lot of problems in the future, especially if it is easy to block the toilet.

Punch a ditch and lead it out with a divided pipe. The shifter may be a bit far away.

If there is a pit distance converter, go to the building materials market to find it.

This shows that you chose the wrong proportion of troops when installing, if you can, try to replace it with the merchant, it should be okay.

There are generally only two kinds of pit spacing for toilets, and if the pit spacing is not suitable, you can only change the toilet.

But if you think about it, you can buy a small toilet, or dig the wall into it a little, which is a bit of a hassle.

The distance between the toilet pit is small, and if there is no way to do this, it can only sit on the ground, probably increase the space above the upper body, and there is no other way.

The small distance of the toilet pit means that the distance from the center of the toilet drain hole to the wall is less than 300 mm required by the standard. This situation is more common when installing a toilet, mainly due to inaccurate measurements or other reasons. If it is not treated, it will affect the use effect, and even cause problems such as clogging.

Here are some ways to solve the problem of small toilet pit spacing:

1.Replace the adapter: If the toilet pit is not too far away from the wall beyond the standard distance, consider replacing the adapter.

The adapter is usually installed on the toilet bowl and can be used to lengthen it. Choose the appropriate adapter according to the specific situation, and test whether the drainage is unobstructed after replacement.

2.Increase the degree of drainage bending: If the toilet pit distance is much smaller than the standard distance, and the effect of the adapter is not obvious, you can consider increasing the degree of drainage bending.

Adding a certain degree of bending in the drainage cluster pipe can increase the length of the drainage pipe, so that the affected pit spacing is in line with the standard requirements. It should be noted that the degree of bending should not be too large, otherwise it will affect the drainage effect. It's a matter of letting.

3.Move the toilet forward: If the toilet pit is too short from the wall and an adapter or an option that increases the bend of the drain cannot be used, consider moving the toilet forward.

This situation requires adjustments to the drainage pipes, which require specialized personnel to carry out the construction. After adjustment, test whether the drainage is unblocked.

In short, if the toilet pit distance is small, you need to find a solution in time. The above provides some commonly used methods, and you need to choose the appropriate solution according to the specific situation. If you can't solve it yourself, it is recommended to find a professional builder to deal with it.

In the process of renovating old houses, various problems are often encountered, such as the most common toilet pit spacing is small, it is difficult to buy a suitable toilet, and forced construction is afraid of leaving sequelae, so it is very worrying. So, what should I do if the toilet pit distance is small? What do I need to pay attention to when installing a toilet?

Let's take a brief look at it together.

1. What should I do if the toilet pit distance is small?

If it has not been decorated, the water tank can be designed in the recess of the wall, which can solve the situation of small pit distance, but the recess is easy to hide dirt and dirt, or use a smart toilet, generally the water tank is directly hidden in the wall, and you can also use a toilet shifter, which can solve the problem of small pit spacing, but the pipe is lengthened, it is easy to flush and not clean, and there is a blockage.

Second, what aspects need to be paid attention to when installing a toilet.

1. Pay attention to measuring the distance of the toilet pit in advance.

According to Qeeka Home experts, many owners because it is the first time to decorate, so do not understand the relevant precautions, when they see the toilet that likes the slag imitation, they will buy it directly, and finally find out that because the pit distance is not suitable, the toilet can not be installed, so it will be very stacked, so the owner must measure the pit distance in advance before purchasing, that is, the size of the toilet drain and the wall, and then according to the size, to choose the right toilet.

2. Pay attention to the way you install the toilet.

In general, there are two ways to install the toilet, one is the installation of the toilet merchant package, and the other is to ask the hydropower master to install, it is recommended that it is best to let the merchant package install, because if there is a problem during the warranty period, you can directly shout to find the merchant to deal with it, and there is no need to have other concerns, but if you find the hydropower master to install, it is possible that there will be disputes because of the fault such as the fiber resistance, so this is very important, it is best to choose a brand with perfect after-sales service to buy.

Summary: The above about what to do if the toilet pit distance is small, and what aspects need to be paid attention to when installing the toilet are introduced here, I hope it will help you. If you want to know more about related information, please pay attention to Qeeka Home.