-
Anonymous users2024-01-24Water leakage is a special solution to this kind of problem of the material, there are detailed instructions on it, according to the instructions may be the water pipe seepage, and the ground should also appear hollow, resulting in water accumulation, the waterproof layer does not know how many layers to do, usually the height does not mean that there is no water leakage, it is to see the number of times and thickness of the brush, as well as the flatness of the ground to decide!
The effect of preventing water leakage on the surface of the floor tiles is not very good, and the waterproofing can only be done before paving the floor tiles. In your case, the waterproofing has not been done well, or it has been damaged, and it needs to be re-waterproofed - it can only be removed.
The light coating waterproofing agent is kept for a short time, and it is more troublesome to redo it after a while, or resurface the ground to do waterproofing, after chiseling off the original floor tiles, the ground must be leveled with cement mortar, and then waterproofing.
-
Anonymous users2024-01-23The waterproof layer of our bathroom always wants to trap the water in the waterproof layer during construction, but in fact, the correct way is to let it drain away.
-
Anonymous users2024-01-22The riser of the 110 section of the toilet drain is cracked, and I can't see it if I don't pay attention.
Let's change the tube, a little troublesome, but thorough.
-
Anonymous users2024-01-21It's OK to put some glass glue around there, and it won't be because there's a water outlet.
-
Anonymous users2024-01-20The toilet is fine, that is, the drain pipe under the floor is cracked and comes out as soon as the drain is drained.
-
Anonymous users2024-01-19There are too many of these kinds of problems, I just want to say, hit the problem and start anew.
-
Anonymous users2024-01-18Water does not leak is a material that specifically solves this kind of problem, the price is not expensive, more than twenty bars, there are detailed instructions on it, you can operate according to the instructions.
The problem of waterproofing is very troublesome, first look at the downstairs seepage or not, no leakage means that the waterproof layer is fine. There are generally two situations of water seepage, 1. Water pipe leakage (use a pressure test pump 8kg to test the pressure, if the pressure is dropped, it means water leakage, knock off the floor tile to repair); 2. The domestic water that penetrates from the surface of the floor tiles should be closed with acrylic waterproof glue (or transparent waterproofing agent) on the floor tiles, and turned up 30cm; 3. The interface between the floor drain and the flush toilet and the PVC sewer pipe is leaking, remove the equipment and redo the interface. It's best to find someone who has experience to help you with each test, I hope it will help you.
If there is water leakage in the tile gap, make waterproof coating on the surface of the tile, which is not a better way to solve the problem of water leakage in the tile gap. Do waterproof coating on the tile, can not completely solve the problem of water leakage in the tile gap, the waterproof coating on the tile gap is not real, and there will be water leakage, so that the maintenance cost is wasted, there is no need to do waterproofing on the surface of the tile, I think there is no such idea, even if the tile surface is waterproof coating, after stepping on the wear and tear of the water leakage, the waterproof coating on the surface of the tile has no way to deal with it, and it is a very difficult thing to completely shovel down the waterproof coating on the tile. >>>More
First, you can use the water pipe directly into the floor drain, and directly flush the garbage in the pipe with water pressure, so that after treatment, see if the drainage of the pipe is better. >>>More
It is advisable to find someone to check if the pipe has been ruptured. If so, it has to be repaired as soon as possible. so as not to get bigger and bigger problems.
It is caused by the destruction of the previous waterproofing layer during rework, and it needs to be reworked or the wall will soon break.