-
Anonymous users2024-01-24Under normal circumstances, changing water and electricity will inevitably damage the waterproofing, and some changes need to be through the wall and slotted. So after the transformation, I was finally doing a waterproofing.
-
Anonymous users2024-01-23Was waterproofing something that existed when it was a rough house before? Regardless of whether it is changed or not, it needs to be waterproofed again. If you change the water and electricity in the kitchen and bathroom, then the waterproof layer will be destroyed, because you must knock on the wall or floor...
So it is necessary to make a waterproof layer again. It's not that it's easy to have problems like water leakage in the future, and then it won't be the price of such a waterproof layer that can make up for it.
Since it is done, it is recommended that you test the pressure of the pipeline first, which is not a water test, and the pressure test is higher than the usual water pressure, and there is no problem with the pressure test, so as to ensure that the water does not leak in the future. Then do waterproofing first, and after the closed water test is no problem, carry out follow-up construction. In this way, the water pipe leakage will not go downstairs, and it can also protect the water pipe.
The bathroom must be waterproof, if the wall of the bathroom is the outer wall of the building, that is, there are no neighbors, then the side wall is also best waterproof to prevent the return of moisture in winter.
Try not to change the water and electricity after the waterproofing, otherwise the new water and electricity slotting part should be redone waterproof.
Plumbing and electricity decoration and bathroom decoration will bring great dust and noise pollution to the room, which will bring great inconvenience to your life, so it is safer to move after installation. But if you are not afraid of dust and noise, it is not impossible to move in a hurry. It's all up to you. Hope to adopt.
Bathroom water seepage depends on the cause of water seepage, if it is a non-water pipe leakage, that is, to eliminate the water pipe and sewer pipe leakage, that is, the tile surface, tile joints, joints around the ground and the water seepage around the root of the floor drain pipe are collectively referred to as tile surface seepage, the main reason for the water seepage on the tile surface is that the waterproof layer is done during the decoration, and the general waterproof layer problem is mainly from the root of the pipe to the downstairs water seepage, and there is a situation that the bathroom exterior wall is damp and peeling, black and moldy. Non-water pipe leakage can be repaired with Yijia waterproof three musketeer products, no need to plane bricks, directly on the surface of the tile maintenance, after the repair of the tile surface does not have any changes, the tile surface will not become slippery, nor will anything be formed. Walking on it or cleaning will not affect the waterproofing material. >>>More