-
Anonymous users2024-01-24There are several forms of toilet inlet valves due to different types of toilets. It's best to remove it first and then take it to a hardware store or plumbing store to buy it against the old one.
The order of disassembly and assembly is as follows: close the angle valve, empty the water in the tank, remove the hose (the end where the toilet is connected), loosen the plastic screws on the plastic inlet valve, and remove the inlet valve. Installation is the opposite.
After installation, the position of the float should be adjusted to reach the corresponding water level.
-
Anonymous users2024-01-23Close the main valve tightly before replacing it.
-
Anonymous users2024-01-22The inlet valve is about twenty-five dollars for a good one, and twenty dollars for a medium one.
When installing the toilet tank inlet kit, the spike base and nut of the inlet valve should be removed first. Align the inlet hole of the tank and insert it into the lower end of the inlet valve. Attach the plastic gasket and nut and tighten it firmly. >>>More
As long as you remove the toilet flush valve in the correct way, you will know how to replace it. >>>More
Follow the steps below to install the tank drain kit.
1. Remove the upper part of the drainage kit first for installation. >>>More
<>< give me a picture of the potato branch in your hand, can you understand it, I don't understand, I don't understand, I don't understand,
Use a handle to rotate a few buckles from an angle in small increments, and then remove them by hand.