-
Anonymous users2024-01-23As long as you remove the toilet flush valve in the correct way, you will know how to replace it.
The process of disassembly is a good learning process, and then according to the specifications and models of the disassembled flush valve to the local hardware plumbing store or to a treasure online to buy the same valve parts, the original way to install back.
There is no need to worry too much about the disassembly and assembly of this kind of valve, and then study and try it first.
When installing the toilet tank inlet kit, the spike base and nut of the inlet valve should be removed first. Align the inlet hole of the tank and insert it into the lower end of the inlet valve. Attach the plastic gasket and nut and tighten it firmly. >>>More
Buy a new one and replace it, otherwise the cost of leaking water is much higher than that of the water change valve.
It is estimated that the problem just appeared, otherwise it would have been repaired earlier. Before the water comes up, press down on the plug in the water filler and press it tightly.
<>< give me a picture of the potato branch in your hand, can you understand it, I don't understand, I don't understand, I don't understand,
How to deal with the broken flush valve of the flush toilet: Grab the total drain and rotate counterclockwise or there are two small plastic cards in the shape of 7 on the left and right of the bottom of the drain, and grab the end of the figure 7 and pull it up with your hand. If you can't repair it yourself, ask a professional master to repair it, ask a professional master to repair it. >>>More