Is it normal for the toilet back basket radiator vent valve to be on the left?

The radiator release valve on the back basket of the bathroom can be at a high point, and the left and right sides are normal.

The radiator's bleed valve doesn't say it has to be on the right, so it's normal whether it's on the left or the right.

Generally speaking, radiator manufacturers will give various options for users to choose, and users can choose the appropriate style according to the actual situation of the installation and use site.

No matter which side the exhaust valve is, the radiator exhaust valve must be above the highest point, and it is best to connect a thin conduit at the mouth of the radiator exhaust valve to guide the water discharged during exhaust to a suitable place to prevent water from spraying.

Hello dear! The radiator release valve on the back basket of the bathroom can be at a high point, and the left and right sides are normal. Where is the venting valve of the radiator in the small back virtual rolling basket 1, when there is air inside the radiator, an air blockage will be formed, which will make the hot water circulation unsmooth, which will affect the heating effect of the radiator, and then it is necessary to open the venting valve of the radiator for deflation.

There are many types of radiators on the market, and the location of the vent valve will be different depending on the type. 2. Under normal circumstances, the deflation valves of the small back basket radiator are located at the top of the columns on both sides of the radiator. The deflation valve is usually equipped with a screw cap, as long as the screw cap is loosened with pliers and other tools, you can start to deflate.

3. If you want to open the air release valve of the small back basket radiator for deflation, you need to use a cone or pliers to loosen the air release valve for wax, and when screwing, it is best not to completely unscrew the air release valve, otherwise it will cause the water in the radiator to leak out and cannot be cleaned up. 4. In the process of using the deflation valve for deflation, if you find that there is hot water flowing out of the position of the deflation valve, you can close the deflation valve tightly. Before deflating, you need to observe in detail whether the entrance valve has been opened, and then turn off all the valves in the home.

5. When the upper and lower valves of the radiator are closed, the air release valve can be loosened for air release. When you hear that the gas is being discharged, you don't need to continue to loosen the gas release valve, you just need to wait for the gas to drain away by itself. In order to avoid getting wet, it is recommended that you also place a washbasin below the deflated position.