-
Anonymous users2024-01-23You can let the smart toilet and the electric water heater share a power socket, or connect the power cord from the front end of the power supply socket of the electric water heater, and set up a mobile plug to power the smart toilet.
However, whether it is a smart toilet or an electric water heater, a good leakage protection switch must be set on the power supply line to prevent power failure protection in case of leakage.
If you use a plug-in strip to supply power to a smart toilet, it is best to choose a plug-in strip with a leakage protection function.
The easiest way is to connect a power strip from the hair dryer socket to the toilet, and the wires are routed along the washstand against the wall.
Does the smart toilet socket stay left or right?
Stay on the left hand side of the person facing the toilet, and the person is sitting on the right hand side of the toilet. >>>More
Firewire to socket L, neutral wire to socket N, ground wire to socket E (grounding symbol).
There is no way, you can only use the drag strip, so before the decoration to consider all aspects, it is best to leave two more spare sockets, everything will be electrified in the future, and there should be more sockets in the kitchen.
If the ground is not paved, open the cushion from the new pipe, the ground has been paved, and the toilet drain has been reserved, so you can only negotiate with the property to modify the main pipeline and separate the branch pipe, and the toilet that drains the water after installation is also a feasible way