-
Anonymous users2024-01-241. There are several reasons for water seepage in all bathrooms, so you must first rule out what is the specific cause and where is the source of water leakage? to determine which method can be solved.
1. Find a professional waterproof leakage repair personnel to check whether the pipeline is ruptured and causes water leakage, etc., if it is a pipeline problem, it is necessary to solve the water leakage problem with the replacement and repair pipeline in time;
2. If there is no problem with the pipeline, then consider whether the waterproof layer is not done well and cause water leakage, if the local water leakage is serious, it is recommended to do the waterproofing again, so as to fundamentally solve the problem.
But if you want to completely solve the problem of water leakage, it is basically impossible not to dismantle the bricks, but there is no effect on plugging the leakage on the surface of the tile, and it is very likely that there will be repeated leakage, and the symptoms are not cured, so in order to fundamentally solve the problem of water leakage, it is recommended to choose local brick repair or all re-do waterproofing according to the actual water leakage. to reach the final water leakage problem.
-
Anonymous users2024-01-23The key to waterproofing the general home kitchen and bathroom is to do a good job of finding the slope and the yin angle of the pipe root and other details of the cracks to do the treatment, the water can flow faster, the probability of water leakage is much less, it is best not to dry pave the floor tiles, put enough cement, do not form a water storage layer, basically solve the problem!
The floor of the bathroom is leveled first. If you're replacing the floor tiles in the bathroom, be sure to level the floor with cement mortar before waterproofing it after chiseling off the original tiles. This avoids leakage of the waterproofing coating due to uneven thickness.
If you decorate the house bathroom without floor tiles, due to the uneven ground, the base should be flat, the surface should be smoothed and calendered, solid, there shall be no hollowing, sanding, cracking and other phenomena, the moisture content of the base should meet the construction requirements of waterproof materials, not greater than 9.
When making the waterproof layer, you should pay attention to whether the waterproof coating is evenly painted, the thickness of the waterproof layer should be above, and pay attention to the waterproof treatment of dead corners and joints. After the completion of the construction, a 24-hour closed water test should be carried out: all the sewers in the bathroom should be blocked, a 25cm height barrier should be built at the door, and then 20cm of water should be injected into the room, and after 24 hours of the scale, observe whether there is any water leakage, and if there is, it should be repaired in time.
After 5-7 days of closed water test, after the waterproof coating has formed a waterproof membrane, a layer of cement mortar protective layer should be made on the waterproof coating layer. This can effectively protect the waterproof coating, and the second is convenient for tiles, and at the same time, it can play a good role in the leakage and waterproof pressure of the pipe. The final process is the laying of walls and floor tiles.
Reminder: The bathroom waterproof slurry adopts the concept of repairing and strengthening the key parts first and then doing waterproofing as a whole, that is, first using the quick-setting repair mortar to carefully and evenly paint the parts that are prone to water seepage, and then use the waterproof slurry to do waterproofing as a whole, so that the special material is dedicated, and the waterproof effect is better and more durable.
Yes, because the moisture-proof of the stone is not for the sake of filial piety and waterproofing, but to protect the stone itself, because the stone is easy to break after absorbing water, and the stone waterproofing can be very good to prevent the weakness of the stone. Jane.
Some waterproof coatings need to be brushed, such as acrylic waterproof coatings. However, Chenguang, this type of JS waterproof coating, does not need to be brushed, and can be directly applied to tiles.
Generally, the new house has to be decorated, think that the waterproofing of the bathroom is generally in the original structural layer, sometimes it is inevitable to destroy, generally when decorating, the decoration company should do waterproofing, generally do 30mm, shower position 1800mm, if you are more concerned about the quality of decoration you can choose to do. When the decoration company finishes it, it is necessary to carry out a closed water experiment, which is generally two times for 48 hours at a time.
It is necessary to do waterproofing in the kitchen, the kitchen is a space with more water, there will often be water on the ground, if you don't do waterproofing, then the water will flow into the wall through the gaps in the wall, which will lead to leakage. Once there is a leak in the kitchen, it will waste money and manpower, and it will take time to rework or repair, and in serious cases, the floor tiles will be knocked out to repair.
Find a bricklayer to replace a brick and a floor drain, you can't do it yourself, you don't need to do waterproofing, you won't touch the waterproof layer. However, the bricklayer needs to carefully shovel off the original mortar.