-
Anonymous users2024-01-24Hello, the general ceiling uses LED lights, and the LED lights are most likely to burn out is the IC ballast, you can open the ceiling and check the ballast inside. After the renovation of my own home, several lights were broken and were all ballast problems, and I bought them back from the Internet and never broke them again after I hit them.
-
Anonymous users2024-01-23Look at the wire links, or the quality of the chandelier!
-
Anonymous users2024-01-22Check whether the lamps, switches, and wirings are damaged in turn.
There may be several reasons:
1. The foundation with the lamp head is not good, and the bulb needs to be tightened. >>>More
After checking the switches and wiring, change the lamps according to the situation, and of course you can also repair the lamps.
It should be that the contact is not bright, you can disassemble the switch board and check it! Fix the wire screws a little! >>>More
If you try to change the lamp somewhere else, it should be that the lamp is broken. The ventilation of the bathroom is not good, such as after taking a bath, it is difficult for the fog to disappear quickly, even if the lampshade is well sealed, it cannot block the fog 100%, and the natural lamp will be broken after a long time. My house has broken 3 times...
There are no lamps, what.
Bai Liang? First of all, you need to buy a 20 32W ring fluorescent tube and put it on the hook. DAO plugs the socket of the ballast between the middle version and the plug of the power tube. If the light doesn't turn on, it means that the ballast in the middle is broken. >>>More