My home router in the living room pulled another cable to the bedroom computer and now I want to be

Updated on Living room 2024-06-07
4 answers
  1. Anonymous users2024-01-24

    There's no problem with that.

    You connect another sub-router on the main router, and there's no problem with two different modes.

    Now let's assume that the original first router is called A, and then connected to it is called B scheme 1, turn off the DHCP function of router B, make it a switch, and then connect the line from A to any of the LAN ports of router B, at this time, if your A router is automatically assigned IP, when you connect to the router for a while, the computer will automatically get an IP

    Solution 2: Change the LAN port address of Router B to a different address from Router A's LAN port, and then select the dynamic allocation mode in the WAN port mode of the router.

  2. Anonymous users2024-01-23

    First, make sure that the IP address of the new router login setting is the same as the original router, and if it is the same, change it first. Then change the Internet access mode to dynamic IP, and connect the network cable to the WAN port.

  3. Anonymous users2024-01-22

    It's very simple, plug the bedroom cable into the router in the bedroom (the port of different colors), why not use wireless from the bedroom to the living room.

  4. Anonymous users2024-01-21

    Router in the living room, desktop computer moved to the bedroom Usage: Wired connection router, set router dialing.

    Router Setup Tutorial].

    Home Network Environment Cabling]:

    1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

    2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

    Computer enters the router]:

    1. The computer IP and DNS settings are automatically obtained.

    2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

    Set Router Dialing]:

    1. In the [Setup Wizard], select [PPPoE Dialing] (some are ADSL dialing), enter the Internet user name and password according to the prompts, and save.

    2. In [Network Parameters] - WAN Settings], select [Normal Mode], and select [PPPoE Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Related questions
I connect a cable from the router to the living room, and then connect a router to see if it works
4 answers2024-06-07

Of course, the WAN port of the second router is set to dynamic IP, and the IP address set by the LAN port should not be in the same segment as the LAN port of the first route, so you can surf the Internet to your heart's content.

My home is a network cable in the living room, and the router can't be connected to it, is it ignore
2 answers2024-06-07

1. Test whether this network cable can access the Internet. >>>More

The two-wire router used by my router only has the balcony signal farthest away from the route
2 answers2024-06-07

Because the router's Wi-Fi coverage is limited, especially if there are doors and walls blocking the signal, you can add an booster or move the router to the middle room of the house, which will improve a lot.

I pulled a cable from behind the living room router and connected a router to the bedroom, but the b
2 answers2024-06-07

Wireless router to wireless router, the second router is set up, there are two ways (provided that the first router has been set up): >>>More

Plug in one network cable from the wireless router in the living room to the next room, and then con
4 answers2024-06-07

This is used by wired bridging routers; The key is whether the secondary router (secondary router) needs to turn on the wireless function; The LAN port of the primary router is connected to the LAN port of the secondary router, and the secondary router is only used as a switch and cannot use the wireless function. If you want to use the wireless function of the secondary router, it can only be the LAN port of the main router - the WAN port of the secondary router; >>>More