Plug in one network cable from the wireless router in the living room to the next room, and then con

This is used by wired bridging routers; The key is whether the secondary router (secondary router) needs to turn on the wireless function; The LAN port of the primary router is connected to the LAN port of the secondary router, and the secondary router is only used as a switch and cannot use the wireless function. If you want to use the wireless function of the secondary router, it can only be the LAN port of the main router - the WAN port of the secondary router;

Key settings for wired bridging:

1.You must avoid conflicting IP addresses of multiple devices and modify the login IP addresses of the conflicting devices.

2.If a network cable is connected to the WAN port of the secondary router, the WAN port of the secondary router uses the dynamic IP connection type and the DHCP service is disabled.

3.If the network cable is connected to the LAN port of the secondary router, you do not need to modify any settings of the secondary router, except for the problem of conflicting IP addresses of multiple devices.

4.The primary router is responsible for dialing, managing and sharing the network and must start the DHCP service.

If you are using a wireless bridge, you need to add an explanation, because the setup is different; If you are satisfied, please give points!

As long as the LAN port IP of the subordinate wireless router does not conflict with the IP of the superior router, the network cable of the subordinate wireless router is disconnected first, the LAN port IP is set to the incoming route setting, and the IP is set to a different IP from the superior (for example, the superior use, the subordinate is set to or, after setting, connect the network cable, restart the route and use it).

Then don't need a wire, wireless bridging will do.

Yes, that's what I'm doing now.