Do you need to re level the floor when the floor tiles in the living room are pried off and resurfac

Updated on Living room 2024-06-10
2 answers
  1. Anonymous users2024-01-24

    The mortar of the original tiles is basically chiseled, and the height difference does not exceed centimeters, and there is no need to redo the leveling layer. I hope my answer can help you.

  2. Anonymous users2024-01-23

    This doesn't need to be releveled, it's not necessary at all. Since the new floor tiles are paved, the dry paving method is used, and the ground is leveled with cement and sand while the construction is being carried out.

    If the floor is made of wood, the floor needs to be leveled. There is also a bathroom to do waterproofing, the ground must be leveled and there is a small slope of 3 5 degrees to the floor drain to facilitate drainage. The living room is paved with floor tiles, there is no need to level.

Related questions
1 answers2024-06-10

This is to check that it is a local issue. Or is it a matter of the whole ground. If it's just a local problem. Of course, just replace a few pieces. You check before you decide!

9 answers2024-06-10

The tool that uses water and electricity to groove along the gap of the floor tiles is the slotting between the floor tiles and the floor tiles. Get out the cement sand between the floor tiles and increase the spacing between the floor tiles. >>>More

22 answers2024-06-10

Hello dear! Glad for your question! Does the removal of part of the tile in the bathroom and the resurfacing of the floor tile affect the waterproofing? : >>>More

1 answers2024-06-10

This is tightly separated from a few pieces, you don't need to do waterproofing first, just stick the tiles on it. >>>More

1 answers2024-06-10

Ask the masters if they want to get caulk. There must be a reason for the large gap, you can still get up and down when you just lay it, but it won't work after a long time.