The solid wood floor was soaked in the urine of the old man because the old man has Alzheimer s dise

Updated on Solid wood 2024-06-19
3 answers
  1. Anonymous users2024-01-24

    Use a mop dipped in decontamination powder or disinfectant, wipe the urine clean, then use a heater, adjust to the bottom and slowly dry, and then spray the special oil essence on the special mop with the floor, wipe along the direction of the floor laying, so that the oil essence is evenly coated on the damaged floor, and after the oil essence is absorbed by the floor, the floor will be intact.

  2. Anonymous users2024-01-23

    If it is not long, apply a small amount of cooking oil, stop for 24 hours, neutralize the urine alkali, and then wipe it off. It's solved.

  3. Anonymous users2024-01-22

    This problem is deep, Forget friends, don't worry about the elderly...

Related questions
5 answers2024-06-19

Get the water away as soon as possible, and then quickly disassemble the floor foundation to dry without completely penetrating the back. >>>More

5 answers2024-06-19

If the floor is already wet, be sure to open the floor, stand upright in the room and dry it naturally, if it is not deformed, it can also be installed and continued to be used, if it is deformed, it can only be replaced with a new one. Be sure not to dry in the sun or hair dryer. It's best to find a professional to come to the site to take a look and make an assessment of the loss, which can be used as the basis for future claims.

3 answers2024-06-19

If the solid wood floor is soaked and there is no deformation, it is not a big deal, and if it is deformed, it is completely finished.

1 answers2024-06-19

.In this case, the two parties can negotiate the loss compensation first, and if the negotiation is not good, it is recommended that you apply to the local price department for an assessmentOr ask a qualified body to conduct an assessment.

3 answers2024-06-19

When it's over, it will be deformed, it will arch, and it can only be disassembled (more troublesome) after cooling, remove the deformed floor, leave the undeformed floor and re-lay it, if it is not enough, you have to buy some new flooring.