-
Anonymous users2024-01-24The solution is: metal cotton + oil (if there is no professional oil, replace it with salad oil), wipe it repeatedly, and it can be restored.
-
Anonymous users2024-01-23Use fine sandpaper to polish off the crystal cushion glue that absorbs etching on the desktop, go through the fine dry yarn 1-3 times, spray the primer, pass the fine dry yarn after the paint is dry, and then evenly repeat the primer, and then dry the yarn again, and cover the primer with a topcoat. Remediation process.
-
Anonymous users2024-01-22Sticking together can be washed off with a kind of water.
-
Anonymous users2024-01-21Uh, you go to the renovation shop to find a master It is generally useful
As long as you zoom in, there must have been collision damage, but this kind of injury is too small to be negligible.
There is no professional tool film on the furniture desktop, and the film will definitely bubble, and there will be a bubble on the film of your mobile phone, and there will be bubbles in such a small area, not to mention the large area of the furniture desktop. >>>More
THE GROWTH AND CONTRACTION RATE OF SOME SOLID WOOD REACHES ABOUT THAT, THAT IS, A ONE-METER-WIDE BOARD MAY GROW OR SHRINK BY 20-30MM. If the expansion joint is not designed, the table top will be crushed or the board surface will be cracked. >>>More
Furniture decoration should be coordinated with the whole room, the glass on the coffee table is dispensable, in order to protect the countertop, there is no cracking on the lifting surface, such as the wood is too wet when the coffee table is made, whether the glass will crack or not, such as good quality, the paint is good after whether the glass is put or not will not crack, the lifting wood should be breathable from the bottom of the lifting surface can be solved, the top has been painted well, and it can not be breathable. But you should be careful when using the glass after putting it, and be careful when putting a hot water cup, because the glass is fragile!! If you have children at home, you should think twice!
The square legs can be linked with angle iron and wooden screws, the high legs of the high table are fixed with triangular brackets and twisted wood screws, and the round legs are connected with long wooden screws through the panel after the front hole is opened.