What glue to use to install the toilet

From the current market point of view, with the improvement of the style of life empty, residents for the quality of life requirements are getting higher and higher, the original house is only used to live, now you can bathe, entertainment, swimming, etc., especially the existence of the bathroom, no longer need everyone to share a pit, so what glue is used to install the toilet? Let's take a look with the small loss and quarrel, I believe it will bring you different insights.

You can use neutral glass glue, because the sealing effect of this material is better, first clean up the floor and debris around the toilet, keep the floor and toilet dry, and then install the toilet, evenly hit the glass glue on the seam between the toilet and the floor, and then use your fingers to flatten, and then wait for the drying to be completed.

What are the steps and precautions for installing a toilet.

1. Check the sewage outlet first, clean up all the garbage impurities in the sewage outlet, especially cement mortar, to prevent sedimentation from blocking the sewage outlet, and check whether the surrounding area of the toilet is flat, and the flat floor will affect the sewer and use.

2. Put the prepared toilet drain hole against the sewage outlet, check whether the size is appropriate, and then install the toilet seal, install the sealing ring on the toilet drain hole, and then fix it against the sewage outlet.

1. After the sealing ring is installed, install the sock trembling water tank accessories, connect the water inlet pipe with the water inlet valve, then open the water valve, wait for the water to enter the water tank, and then flush the toilet, check whether the sealing ring of the toilet is effective, flush it several times, test whether there is any water leakage, if you are sure that there is no water leakage, you can play glass glue in the gap between the toilet and the floor.

4. Before playing glass glue, you should first use a rag to clean the floor and toilet base around the toilet bowl and keep it dry, and then play glass glue, pay attention to the toilet bowl can not be moved after playing glass glue, and you must wait for 24 hours to completely dry before you can use it.

Summary: The above about what glue to use for installing the toilet and what are the precautions for installing the toilet are introduced here, I hope to provide you with some help. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

When installing a toilet, sealant or silicone is often used to ensure a tight and secure connection. Here are two commonly used types of glue::

Sealant: The sealant is usually a polymer elastomeric adhesive with strong adhesion and water resistance. It is suitable for filling and sealing the gap between the base of the toilet bowl and the ground to ensure that water does not leak from the bottom.

Choose silicone sealants or polyurethane sealants, which perform well in terms of durability and sealing.

Silicone: Silicone is a glue with good sealing and high temperature resistance. It is often used to install a drain gasket (also known as a toilet mat) at the bottom of the toilet bowl to ensure a seal between the drain and the drain pipe.

Silicone can also be used for other connections, such as the connection between the tank and the base.

When installing the toilet, it is generally necessary to use sealant to fix the toilet bowl to ensure its stability and sealing. Common options include silicone sealants, urethane sealants, or rounds.

Toilets can be installed with silicone sealants or polyurethane sealants. These two glue limb sedans have good sealing performance, which can effectively prevent water leakage. When choosing a glue, you should choose a glue that is suitable for ceramics and floor materials, and pay attention to the water resistance and corrosion resistance of the glue.

Before using the glue, the installation position should be cleaned to ensure that the surface is dry, smooth, and free of impurities such as oil and dust.

1. Before choosing a toilet on the market, first determine the size of the water in the seat (i.e., the distance from wall to wall). Before installation, please make sure that the product accessories you choose, completed, please carefully review this manual and learn about some products.

2. Determine the height of the drain according to the condition of the toilet and cut off the rest of the part. The goal is to make the plumbing and toilet bottom more consistent. Start by using a hacksaw or cornea for the sewer according to the horizontal height of the centimeter, because the flange of the toilet bowl is soft.

If it is not centimeters high, there may be water seepage problems, and centimeters are more tightly fitted.

3. Measure the pit distance. Before choosing a toilet, you must first determine the size of the water in the house, that is, the distance from the wall to the water. When using a toilet, if you want to decorate the tiles, you must measure the pit distance after applying the tiles.

Otherwise, the toilet will be bought back and cannot be installed.

4. Install the flange ring provided with the toilet at the drain. Remember to press hard to ensure that the Famin ring and toilet drain are compacted. Place the flange on the toilet drain.

Then carefully align the lower hose and lower it smoothly. At this point, the wall of the sewer pipe is inserted into the viscous clay of the flange for sealing.

5. After the water test is completed, start to install the cover.

6. Glue around the toilet, this step is also very important, not only to stabilize the toilet, but also to prevent the smell of the net from being released from the toilet. Therefore, we will not only fight, but also four whole weeks. At the intersection of the toilet bowl and the outer surface of the floor, since the toilet bowl and the floor are not one, you can use a joint seal transparent sealant for stirring, and seal the outer opening of the toilet bowl of the flush bridge to maintain the integrity of the floor.

Some bathroom water can clog around the toilet bowl. NOTE: IF YOU NEED TO INSTALL THE SET SCREWS, FIRST APPLY A SPECIAL SEALANT INSTALLED IN THE TOILET BOWL EVENLY ON THE OUTSIDE 2CM OF THE TOILET BASE.

The drain of the toilet bowl should be pulled towards the center of the drain. Expansion bolts are located on the left and right sides of the toilet, remove the toilet, punch holes and raised bolts.

7. Install or debug the water tank accessories.

8. After installing the toilet, wait until the glass glue (putty) or cement mortar has solidified before releasing water. The curing time is usually 24 hours.

Toilet installation with putty and neutral glass glue.

I really don't know what kind of glue is used in the sedan car, the United States and China of Dongjian that I bought at the beginning, and then the glue is also sold by them there, and it is much more expensive than the glass glue bought outside.

It seems that most of them are white silicone, but I have seen other people install Wrigley toilets with clear glass glue.

Hello dear. The toilet is generally installed using putty and neutral glass glue. putty and neutral glass glue "toilet installation is generally made to make hunger with putty and neutral glass glue.

1.Although the price of glass and limb glue is very cheap, it is also very simple to use. 2.

It is not recommended to use cement at the time of the equipment. This is due to the fact that the cement will swell and the bottom of the toilet bowl is empty. 3.

Glass glue. When choosing glass glue, you can choose neutral glass glue. Choose glass glue with good sealing.

Do you have any other questions? I can go on and on for you 3I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again.

Wishing you well; Have a good life and all the best! 4.If you are satisfied with my service, please give a thumbs up, and once again wish you all the best!

Peace and joy <>

1. Install neutral glass for toilet with masking glue.

2. When choosing, we should also pay attention to the closed limb tie, because the neutral glass glue with good closure is made of vacuum material and is not prone to mold.

3. In the later use, the fit between the glue and the toilet can also be guaranteed, and the sealed glue is more firmly glued.

The above about what glue to use to install the toilet is introduced here, I hope to provide you with some help.

The installation of the toilet bowl is generally the use of putty and neutral glass glue, most of the glass glue sold on the market is still mildew-proof, weather-resistant (high temperature resistance, low temperature resistance) and other functions, consumers should choose according to the actual needs. Generally speaking, the washbasin and toilet in the bathroom, and the countertop in the kitchen should be made of glass glue with anti-mildew performance, which can be acidic or neutral; Metal ceilings, shower rooms, and mirrors should be made of mildew-proof neutral glass glue, rather than acidic ones; Smoke machine stoves and windows should be made of weather-resistant neutral glass glue. The fish tank has high requirements for the waterproof and adhesive performance of the glass glue, and the acidic structural sealant should be used, and the new glass glue of polyurethane can also be used, but its price is higher, and a bottle of 300 ml of glass glue is about 100 yuan.

In fact, we don't need to worry about what glue to use, the masters will buy it, don't worry too much. This is just a small thing in the decoration of the home, if you worry about everything, it is estimated that you will be very tired after the decoration.

There is white cement and silicone. However, the building materials bargainers of Heli Group Buying Network recommend everyone to use anti-mildew glass glue! There is white cement and silicone. may become moldy and discolored. With anti-mildew glass glue, it can remain unchanged for a long time without affecting the appearance.

White cement or silicone.

Silicone can become moldy.

You can use Candia anti-mold glue to apply to the edges of bathrooms or kitchens that are often damp to reduce mold, blackening or cracking.

1. Install neutral glass glue for toilets.

2. When choosing, it is also necessary to pay attention to the closure of the tight punching section, because the neutral glass rubber hole reed with good tightness is made of vacuum tremor and is not easy to appear mildew.

3. In the later use, the fit between the glue and the toilet can also be guaranteed, and the sealed glue is also more firmly glued.

The above about what glue to use to install the toilet is introduced here, I hope to provide you with some help.