-
Anonymous users2024-01-24Bungalow ceilings can be clothed, general cloth is easy to break, it is best to use umbrella cloth. The method of using cloth ceiling: 1. Base or bottom plate treatment:
Embedded wood bricks on the structural wall plastering cement mortar screed. If it is directly paved, the bottom plate should be flattened and densely embedded with putty, scraped with putty 1 2 times, after the putty is dried, smoothed with sandpaper, and the surface of the base layer before pasting is brushed with clear oil. 2. Hang straight, set square, find rules, and play line:
According to the requirements of the design drawings, the decorative size and shape of the room that needs to be upholstered wall are implemented on the wall through the processes of hanging straightening, setting squares, finding rules, and elastic lines. 3. Calculate materials, sleeve fillers and fabrics: firstly, according to the requirements of the design drawings, determine the specific practices of the upholstered wall.
4. Paste fabric: If the direct paving method is adopted, the fabric can be pasted only when the wall fine wood decoration is basically completed and the frame paint reaches the living conditions. 5. Install face or decorative edges:
According to the design of the selected and processed face or decorative edge, according to the design requirements of the paint brush (to meet the living conditions), you can carry out the installation of decorative panels. First of all, after trying to achieve the effect of the design requirements, it can be fixed and installed with the base layer to close the face or decorative edge, and finally paint the edge paint to live. 6. Trim the soft package wall
Dust removal, nail the protective film and deal with the glue marks.
-
Anonymous users2024-01-23Base or bottom plate treatment: Embedded wood bricks and plastered cement mortar screed on the structural wall. If it is a direct paving, it should.
First, the bottom plate joint is embedded with putty and compacted, scrape the putty 1 2 times, after the putty is dry, smooth it with sandpaper, and paste the surface of the base layer with clear oil.
Hanging straight, set square, find rules, elastic line: according to the requirements of the design drawings, the room needs to be soft-wrapped wall decoration ruler.
Inches, shapes, etc., through the process of hanging straight, setting squares, finding rules, and elastic lines, the actual size and shape are implemented on the wall.
Calculate the materials, sleeve fillers and fabrics: first of all, according to the requirements of the design drawings, determine the specific work of the upholstery wall.
Law. Paste fabric: If the direct paving method is adopted, the frame should be painted when the wall fine wood decoration is basically completed.
To the living conditions, the fabric can be pasted.
Install the face or decorative edge: according to the design of the selected and processed face or decorative edge, according to the design requirements of the oil.
After the paint is brushed (to meet the living conditions), the decorative board installation work can be carried out. First of all, after trying to achieve the effect of the design requirements, it can be fixed and installed with the base layer to close the face or decorative edge, and finally paint the edge paint to live.
Trimming the upholstered wall: dust removal, nail the protective film and treat the adhesive marks.
Soft film ceiling - (also known as: ceiling soft film, elastic cloth) was founded in Switzerland in the 19th century, and then by the Frenchman Mr. Farmland SCHERRER (Ferrand Scor) in 1967 continued to research and improve and successfully promoted to the ceiling market in Europe and American countries, soft film ceiling has increasingly become the preferred material for ceiling materials. The soft film is made of a special polyvinyl chloride material that weighs about 180 320 grams per square meter and has a fire rating of B1.
The soft film is formed by one or more cuts and is finished with high-frequency welding. The soft film needs to be measured in the field and then made in the factory. The stability of the soft film dimensions ranges from -15 degrees Celsius to 45 degrees Celsius.
The translucent film ceiling can be used with various lighting systems (such as neon, fluorescent, LED) to create a dreamy, shadowless indoor lighting effect. At the same time, it has abandoned the bulkiness, danger and shortcomings of small pieces of glass or plexiglass, and has gradually become a new decorative highlight.
-
Anonymous users2024-01-22Does it have to be made oblique?
Well, do you remember the old-fashioned way of hanging with long bamboo poles? That is, one on the top and one on the bottom side. This way it looks like it won't wrinkle and can be effective. But ......
-
Anonymous users2024-01-21Yes, it should be a bit like holding an umbrella
-
Anonymous users2024-01-20Hang the lights off in the middle of the living room.
-
Anonymous users2024-01-19Save money and look good in any color.
Base or bottom plate treatment: Embedded wood bricks and plastered cement mortar screed on the structural wall. If it is directly paved, the bottom plate should be flattened and densely embedded with putty, scraped with putty 1 2 times, after the putty is dried, smoothed with sandpaper, and the surface of the base layer before pasting is brushed with clear oil. >>>More
In some of the next floor, especially the ceiling is relatively high, the home style is modern, you can consider using the curtain to make the ceiling, which is also unique.
Multiply the measured size by 2 to get the desired fabric size.
It's the same as the ordinary one, it's usually twice as much, and it's okay to have a little more or a little less.
You can wrap it, but the leather sofa is too light, and it is easy to slip after wrapping the fabric. It is always necessary to tidy up, and if you are afraid of trouble, it is best not to use it. >>>More