-
Anonymous users2024-01-23Multiply the measured size by 2 to get the desired fabric size.
-
Anonymous users2024-01-22Zhengzhou Yuantong Textile City customer service specialist will answer for you: If the balcony has corners, the choice of curtains is, of course, corner curtains. Generally, the proportion of the window and the proportion of the curtain fabric is between to, you can measure the size of your window on the spot, then you will naturally know how much material the curtain fabric uses.
For unenclosed balconies that meet the following criteria, the floor area should be calculated according to the general horizontal projection of the envelope. If it is exceeded, then the excess part is calculated as the total floor area. Regardless of whether the enclosed balcony meets the following criteria, the floor area must be calculated. >>>More
Count the area of doors and windows, and the railings must also be sealed, of course!
The original statement was that the closed area was counted as the full area, and the non-closed area was counted as the half area, but the construction area calculation rules issued in 11 years also said that it was counted as half area regardless of whether it was closed or not.
1. Installation of plastic shutter curtains For this type of product installation, it is best not to close it to the temperature sensitive, and at the same time, when the hand pulls up and down, the force should not be too strong, and the height of the curtain should be pulled at the same time with a double-strand lifting rope to avoid tilting, if there is dust in the page, it can be brushed off with a feather duster or wiped off with a damp cloth, or it can be removed and rinsed with water. >>>More
According to the Code for Calculating the Construction Area of Construction Projects GB T50353-2013 3 0 21, the balcony in the main structure shall be calculated according to the horizontal area of the outer periphery of the structure; The balcony outside the main structure should be calculated according to the horizontal projection area of its structural bottom plate1 2 area.