The home is equipped with broadband, but the broadband interface is in the master bedroom, and the d

Updated on Master bedroom 2024-06-30
4 answers
  1. Anonymous users2024-01-24

    You can install a wireless router, but you have to have a wireless network card on the desktop, otherwise you have to go wired. After you set up the wireless router with your desktop, you can unplug the network cable and connect directly to the wireless network. However, your main network cable must be plugged into the routing WAN and port, and the routing LAN port can be plugged into the network cable without plugging in the network cable.

  2. Anonymous users2024-01-23

    If you don't have a lot of time online, you can consider installing a wireless router, but it doesn't work as well. It is recommended to walk the line (find a network installer to help, because these people have experience), try to walk the line in a place that is not obvious, the line should be straightened, and the line nail should be fixed evenly at 40-50mm, and the line should be considered for the baseboard, sofa bottom, door frame, etc. . . . Be careful, and it won't look as bad as you think.

  3. Anonymous users2024-01-22

    Yes, buy a wireless router If you want to buy a desktop, you need to buy a wireless receiver Generally about 50 Use a computer to connect the routing and set it up After that, as long as the route is connected to the main line, the desktop can receive wireless signals.

  4. Anonymous users2024-01-21

    Now there is a power cat, a power wireless router, you can consider buying that, you can use it if you have electricity.

Related questions
2 answers2024-06-30

If you can use a wireless router, a desktop computer can be connected to an external USB wireless receiver.

6 answers2024-06-30

First of all, the network environment of your home should not be arranged by yourself, your living room, bedroom, all the network cables in the house should be connected together through a switch or other equipment, and you only have one line and only connect to the multimedia box in the living room, so only this network cable is connected to the router, the router can dial up the Internet normally!

2 answers2024-06-30

Look at where your house's hub box or information box (branch box of weak current lines such as network cables, telephones, cable TVs) is, and then put the router in the box. Plug in the WAN port of the router for the incoming line of the network, the LAN port of the living room and bedroom lamp room, and then set up the router.

3 answers2024-06-30

Connect a network cable to the broadband interface on the wireless router in the living room, and then connect a network cable in the room, and you can use it!