-
Anonymous users2024-01-24First of all, you see whether the hot water pipe in your kitchen is the same as the hot water pipe of the water heater (whether it branches from above), if it is not connected, no hot water is certain, if it is connected and there is no hot water, there are two situations: one is that the hot water pipe may be blocked, and the other is that the mixing switch is broken.
-
Anonymous users2024-01-23In the kitchen, the water filter of the hot water faucet is blocked, and the water outlet becomes smaller, so just remove it and clean it up.
-
Anonymous users2024-01-22The gas water heater came out of the hot water before, and suddenly the hot water hose in the kitchen leaked that day, and there was no hot water after replacing one.
-
Anonymous users2024-01-21The kitchen has no hot water pipes, or there are no hot water pipes at all.
Gas water heaters are the best, electric instantaneous water is second, and faucet hot water is recommended to be used sparingly. >>>More
It should be that the faucet in the kitchen is blocked, the water flow is small, (it is a hot melt pipe does not exclude the contents of the pipe that slip and blockage) close the valve to open the water inlet or the outlet of the faucet, clean the filter, and it should be OK after it is installed, try it.
It is recommended to replace the regulating valve at the shower with a thermostatic valve, which will not be hot and cold, and will not be affected by water pressure.
Clean the pipes with vinegar, preferably for four or five hours in pipes that do not produce hot water, to ensure that it is effective.
Your water heater should be installed in the kitchen, because the water pipe to the bathroom is long, the water pipe to the sink is short, and the water induction of the water heater is not sensitive, you try to adjust the temperature and fire to the maximum to see if it can be solved, if it still can't be solved, you have to find an after-sales professional of the water heater to debug. Hope to adopt.