Does anyone know how to install a Wrigley toilet?

Step 1 Before the toilet is installed, a comprehensive inspection of the sewage pipe should be carried out to see if there is any mud, sand, waste paper and other debris in the pipe.

At the same time, it should also be checked whether the ground of the toilet installation position is horizontal, and if the ground is found to be uneven, the ground should be leveled.

Step 2 Flip the toilet bowl and determine the center on the toilet drain.

At the same time, draw a cross centerline, which should extend to the bottom of the toilet bowl around the feet.

Step 3 Align the reticle line on the toilet bowl with the ground drain outlet and install the toilet bowl horizontally.

At the same time, press the sealing ring tightly and install the anchor screws and decorative caps.

Step 4 Install a special sealing ring on the toilet drain.

Step 5 Drain the water for 3-5 minutes to rinse the pipes to ensure the cleanliness of the water pipes.

Then install the angle valve and connecting hose.

Then connect the hose with the installed tank fitting inlet valve and press the water source.

Step 6 Check whether the water inlet and sealing of the water inlet valve are normal.

Check whether the installation position of the drain valve is flexible, whether there is jamming and leakage, and whether there is leakage to install the filter device of the inlet valve.