-
Anonymous users2024-01-24Find a cement worker, you have to take out the old toilet bowl and install a new one.
-
Anonymous users2024-01-23There are two ways to install a ceramic toilet bowl:
Pull burst bolt fixing method: put the toilet in the installation position, draw the contour line of the toilet foot on the ground, and draw the bolt hole position through the installation hole made by the toilet. After the hole is drilled, insert the burst bolt, store the elastic cement at the junction of the toilet discharge outlet and the ground sewage outlet, put the toilet smoothly, tighten the burst bolt, and finally seal the toilet foot with glass glue.
Cement bonding method: draw the contour line of the toilet foot on the ground, and lay a circle of cement mortar with a width of 30mm and a height of 15mm along the contour line (cement: sand = 1:
3) Coat the adhesive at the junction of the toilet outlet and the ground sewage outlet, wipe the foot of the toilet, and place it smoothly in the installation position to make it firmly bonded and wipe off the overflowing cement mortar.
Although toilet installation is simple, it is important to master the installation method of the toilet, and only the toilet with accurate installation can make people feel at ease. Let's take a look at the general process of toilet installation. 1. Check the levelness of the sewage pipe and the ground Before installing the toilet, the sewage pipe should be comprehensively inspected to see if there is mud and sand, waste paper and other debris in the pipeline, and at the same time check whether the ground of the toilet installation is level. >>>More
1. People grow taller.
2. The floor pad is high. >>>More
Steps to change from squatting to sitting:
1. Smash the squatting stool; >>>More
Habit becomes nature. You should have been using squatting since you were a child, so you are not used to the toilet now, and this problem is understandable. Whether to install a urinal at home is your own business, as long as it is appropriate and comfortable. There is no uniform rule.
First of all, it depends on whether your squatting toilet is now buried in the floor of the toilet or has been raised, if it is currently flat, take out the squatting and destroy the luggage, connect the drainage pipe, and install the toilet after the squatting pit is filled. If it has been raised, remove the raised one, and then install a toilet. It depends on whether the toilet you are going to buy has front or back drainage, and then determine the size of the drainage pipe from the wall.