-
Anonymous users2024-01-24Flush toilet tank fittings installation steps.
Toilet tank accessories are called "the heart of the toilet", and the accessories of the toilet tank mainly include: water inlet valve, drain valve, and button.
Open the water inlet valve, observe the water inlet and water inlet height in the water tank, and adjust the height of the float in time.
After all of the above are installed, you need to check the toilet drain capacity and each connection to see if there is any leakage.
Finally, install the toilet seat and toilet lid, and at this point, the entire toilet bowl is installed and ready for normal use.
There's no picture.,If you want to go to the picture.,I'll tell you how to install it.。
Clause.
1. Preparation for the installation of the flush toilet Before installing a flush toilet, the following 5 preparations should be made: first, check the level of the ground where the toilet is installed; The second point is to check the sewage pipe of the toilet bowl and remove the debris in the sewage pipe; The third is to leave a distance of 2 to 3 mm above the ground at the sewer outlet; The fourth point is to check whether there is any leakage in the water pipe and debug and install the water tank accessories. Finally, it is necessary to test the sewage effect of the toilet, if the water is flushed very quickly, it means that the drainage is not smooth and there is a blockage. >>>More
First put the toilet alignment hole to stabilize the surrounding line, then remove the line to play glass glue and put the sealing ring on, put the toilet on the glue line, wash the excess glue, connect the hose to the water supply and it will be available after 24 hours.
How do you unclog a flush toilet? Toilet blockage is generally a blockage at the toilet trap, and the best and easiest way is... >>>More
Plumbing and building materials store or sanitary ware store.