-
Anonymous users2024-01-24Build the wall first, and the newly separated bathroom should be waterproof according to the specifications, and the damaged waterproof bathroom should be re-waterproofed
-
Anonymous users2024-01-23To do waterproofing, you need to do it on the surface of the water, black gold steel permeable crystalline waterproofing, if you can do it yourself, use a super permeable waterproof guard to do waterproofing (if there are cracks and potholes on the cement surface, fill the complete with metin porcelain glue and then do waterproofing).
For the tile surface, first check whether the filling of the tile gap is complete (if the filling of the tile gap is incomplete, fill it with Meiding porcelain glue, and then use a stone tile waterproof guard to do waterproofing).
Exterior wall paint can be made waterproof with transparent waterproof repair adhesive.
The product will penetrate into the base layer and make the base layer waterproof. The product is recommended to be constructed in a dry place, the drier the base surface, the deeper the product can penetrate, if the base surface is full of moisture, high density, the material can not penetrate well. Regarding the principle of waterproof plugging, the source of water leakage is not blocked, and the water will only continue to penetrate into the wall, which will exist inside the wall for a long time, and will leak out from other parts of the wall when the water reaches a certain level.
The problem cannot be solved, and only by spraying waterproofing agent on the outside of the roof or exterior wall so that the water cannot penetrate into the wall and flow away can the problem be completely solved.
It should be done first to do waterproofing, lay a layer of cushion, make pipes, install partitions or walls.
zhongj directly uses frosted glass in the middle to make a partition.
Frosted glass or stained glass is fine!
Frosted glass remembers that the rough surface should be washed inside; Otherwise, it will be easy to walk away if you get wet with water outside! >>>More
Yes, you can add two more connectors to the water heater outlet pipe to connect to the other two rooms.
Theoretically, as long as your area is large enough, it's completely fine, but in practice? You have to be able to do this kind of thing yourself, because you only have a sewer pipe with a sewage pipe, you have to find a way, the toilet in the bathroom should also be equipped with another pipe, leading to this sewer, as long as you are good at doing this, it is okay, or just find a professional, someone who will install the pipe to install it for you is also okay, I don't know how many floors you are, if it is the first floor, then dig into the ground, bury the pipe in, connect the original sewer can be, If it's upstairs, it may be a little more troublesome, maybe you have to raise the newly installed toilet next door, and then install a pipe to connect it to the position under your toilet, so that the sewage can go down smoothly.