-
A hardware store, or a grocery store.
-
Hello! You're missing two lids: 1) the lid of the water tank; 2) Toilet seat.
These are sold in the bathroom store, when you buy it, you have to say the model clearly, look at the picture should be a one-piece toilet, when you buy it, you tell the store that it is a one-piece toilet.
The lid of the water tank is broken, and it is generally not matched, so first find something to make a temporary use by yourself, and slowly find a suitable model.
You go to the building materials market near Qingdao to take a look, there are generally sanitary ware accessories for sale, you go to match a no, but you go to the time to measure the longest width and length of the water tank cover, and take a photo with your mobile phone, you can buy it on the comparison, I hope it can help you.
If the water tank cover is broken and not broken, it can be applied with cement mortar on the back, and it will stick when it is dry.
The lid on the flush toilet tank can generally be lifted directly by hand, but some of the tank lid is bayonet, and if there is a bayonet, press either of the two buttons of the pump (round or half-moon shaped) first, and pry the other out with a knife or flat mouth cone (there is a shallow groove on the adjacent side of the two buttons). Then, you can pull both out. Finally, use a knife or flat cone to screw out one of the plastic screws underneath, and then you can move the ceramic toilet lid up.
There are two buttons above the toilet lid, press any of the buttons, and then use the flat mouth to change the cone or a knife, and the process should not be too strong, otherwise the toilet lid will be easily damaged; After taking out the two buttons, use a knife or trail to unscrew out the fixing screws of the tank cover; Once the screws are removed, the tank lid can be opened. >>>More