-
The lid on the flush toilet tank can generally be lifted directly by hand, but some of the tank lid is bayonet, and if there is a bayonet, press either of the two buttons of the pump (round or half-moon shaped) first, and pry the other out with a knife or flat mouth cone (there is a shallow groove on the adjacent side of the two buttons). Then, you can pull both out. Finally, use a knife or flat cone to screw out one of the plastic screws underneath, and then you can move the ceramic toilet lid up.
1. Press either of the two buttons for pumping water first, and pry the other one out with a knife or a flat mouth cone (there is a shallow groove on the adjacent side of the two buttons); Then, you can pull both out. Then, use a knife or flat cone to screw out one of the plastic screws underneath, and then you can move the ceramic toilet lid up. >>>More
You go to the building materials market near Qingdao to take a look, there are generally sanitary ware accessories for sale, you go to match a no, but you go to the time to measure the longest width and length of the water tank cover, and take a photo with your mobile phone, you can buy it on the comparison, I hope it can help you.
If the water tank cover is broken and not broken, it can be applied with cement mortar on the back, and it will stick when it is dry.
There is the water of the direct press type size two heads. >>>More
To match one, there are generally places to buy building materials. You can ask for it, or dig it out on a treasure.