How do you open a toilet tank lid?

There are two buttons above the toilet lid, press any of the buttons, and then use the flat mouth to change the cone or a knife, and the process should not be too strong, otherwise the toilet lid will be easily damaged; After taking out the two buttons, use a knife or trail to unscrew out the fixing screws of the tank cover; Once the screws are removed, the tank lid can be opened.

What to do if the toilet tank lid is broken.

1. Once the toilet tank lid is broken, if you want to completely solve this problem, it is recommended to replace a new toilet lid directly, some people will choose to replace the toilet, but the cost of replacing the toilet is very large, and there is no need to replace the toilet, just replace the toilet water to love to solve the problem.

2. The toilet generally has an after-sales warranty period, if the toilet has a broken water tank cover during the warranty period, and it is not a man-made damage, in this case, you can directly call the manufacturer's after-sales phone, so that the manufacturer can send someone to the door for maintenance, and there is no need to pay the maintenance fee after the maintenance is completed.

3. If the warranty period of the toilet has expired, you can find a professional toilet maintenance personnel and let them come to repair or replace the toilet tank cover, but in this case, you need to pay for the maintenance of the toilet tank cover, and the manufacturer will not be responsible for this cost.

The Roca toilet tank lid is opened as follows:

1. First of all, press either of the two buttons (round or half-moon), and pry the other out with a knife or a flat taper (there is a shallow groove on the adjacent side of the two buttons);

2. Then, you can pull both out.

3. Finally, use a knife or flat mouth cone to screw out a large plastic screw underneath, and then you can move the ceramic toilet lid up.

4. Put in the blue bubble, and after 15 minutes, the water will be blue and blue.

A. The lid on the flush toilet tank can generally be lifted directly by hand, but some water tank covers are bayonet, and some skills are required to open the bayonet. First, press either of the two buttons to pull the water out, pry the other out with a knife or a flat-mouthed cone (there is a shallow groove on the side of the two buttons next to each other), and then you can pull both out. After that, use a knife or a flat mouth cone to screw out a plastic screw underneath, and then you can move the ceramic toilet lid up.

B. The flushing principle of toilets on the market is basically two categories: straight flush type and siphon type. The siphon type is divided into vortex siphon and jet siphon. There is a complete pipe in the siphon toilet, the shape is a side-down "S", the slope of the pool wall is gentle, the noise problem has been improved, and it has the characteristics of strong sewage discharge capacity and large clean surface, so the vast majority of toilets, especially the conjoined one, are siphon type.

Step 1: The toilet tank is located at the back of the toilet, similar to a cuboid.

Step 2: The water tank cover is heavier, so you need to hold both sides of the water tank cover with both hands.

Step 3: There are buttons on the top of the water tank cover, and a plastic connection button about 3-5 cm long below, so the lifting amplitude should be high.

Step 4: Lift the lid of the tank as a whole to a height of about 20 cm and remove it, and the toilet tank lid will be opened.

There is a toilet bowl lid with two heads of direct press type. It discharges water all by the top and bottom, and it is separated. Take whatever you want.

There is a toilet tank lid with a push-type single drain. There is a rope in it. The top and bottom levers act to drain the water.

You can only open it a little and disassemble the rope first.

I don't know what your toilet tank lid looks like.

The plastic toilet lid only needs to press and hold the side of the water tank, and the bottom part of the dividing line between the water tank lid and the water tank can easily open the water tank cover, while the ceramic toilet lid is more troublesome to open, you need to press one of the pump buttons first, and then pry out the other button with a knife, and then pry out the buttons, and only after screwing out the internal screws can the ceramic toilet lid be opened.

Second, how to clean and maintain the toilet.

1. Clean regularly.

The toilet can be said to be the dirtiest, although there is a cleaning work in daily use, but there will be some places that are inconvenient to clean, so it is necessary to clean and maintain regularly, such as pipes, flush holes, filters, surfaces, etc., it is best to clean the pipes and flush holes once a week, clean the filter once a month, and clean the glaze once every three days.

2. Focus on cleaning.

There are many parts of the toilet bowl that are most likely to be stained with bacteria, such as the toilet seat, the water in the toilet bowl will splash on the toilet seat, if it is not cleaned after use, there will be residual bacteria, and the next time it is used, it will be directly in contact with the skin, which will affect human health and increase the possibility of spreading diseases.

The toilet tank lid is opened like this, 1. The structure of most toilet tanks is relatively simple, there is a joint in the upper part of the water tank, and then you can hold it up with both hands, and the water tank will be opened;

2. There is also a kind of water tank cover that is equipped with its own bayonet, first press a button for pumping, and then pry out another button with a knife, you can see that there is a slot on the adjacent button, pull out the remaining buttons.

3. Finally, use a knife to screw out the plastic screws below, and the water tank can be moved up at this time.

The failure of the water tank is caused by the poor quality of the toilet itself, so we try to choose a better product when buying a toilet tank.

Carefully lift the lid of the water tank.

How to open the toilet tank cover:

1. If it is an ordinary toilet tank, you can see the internal structure of the tank by holding it directly with both hands at the seam.

2. If it is a toilet tank with its own bayonet, first press one of the buttons of the pumping, use a knife or flat mouth to change the cone to pry out the other button, and then you can pull out the two buttons of the Qingchun car, and finally use a knife or flat-nosed pliers to screw out the plastic screws below, and then the ceramic toilet lid can be opened.

Steps to replace the toilet tank cover

1. First of all, look at whether there are cracks on the old toilet bowl (especially the edge of the toilet), because the toilet is a ceramic product, if it is broken, it will be like glass, and it is very likely to cut people, so it is safer to wear thick work gloves when moving the toilet.

2. Lift the water tank cover, and then remove the water tank cover.

3. At this time, the water source should be turned off, and the position of the water valve should be generally on the left side of the toilet.

4. Press the toilet flush handle and do not let go until all the water in the water tank is flushed away, and then wear rubber gloves to dry the water in the water tank with a sponge or towel.

5. In general, the structure of the water tank is not very complicated, and most of them are fixed with buckles. First look at the position of the inlet valve in the water tank, generally speaking, the buckle and nut that fix the inlet valve are directly below, and you can unscrew it by hand. Install the new inlet valve in the original position, then turn the card of the inlet valve to the open direction, and pull the inlet valve body to adjust the height of the inlet valve.

6. Tighten the fastening nut and take out the gasket in the middle. Then put the drain head on the drain hole of the water tank, adjust the position well, and then re-put the gasket and tighten the fastening nut. Buckle the positioning of the valve body on the positioning hole of the drain head.

Rotate the body clockwise. OK, you can hear a "click".

7. The toilet tank is installed. At this time, open the water pipe to see if there is any leakage, and re-debug it after checking out the problem of stuffiness. If there is no water leakage, it proves that there is no problem with the installation of the water tank.

Opening method: 1. Press the round button of the flush button;

2. Cut out the half-moon button;

3. Then cut out the round button, and found two plastic screws and one steel screw;

4. Unscrew the three screws and slowly lift the water tank cover upwards to remove.

The toilet seats are all movable and open as soon as you take them.

The toilet seats are all movable.

Typically, the toilet tank lid can be opened by the following steps:

1.First, confirm the toilet model you are using and determine how the tank lid is secured.

2.If it is screwed, you can use a screwdriver to unscrew the screws and gently remove the tank cover.

3.If the buckle is fixed, you need to find the position of the buckle, gently push it open or press the buckle, and lift the water tank cover up when you turn back to remove it.

It should be noted that before opening the lid of the water tank, it is best to close the toilet inlet valve to avoid water splashing out due to improper operation and causing unnecessary trouble. If you are not sure how to do this, it is advisable to seek the help of a professional.

1. Press either of the two buttons for pumping water first, and pry the other one out with a knife or a flat mouth cone (there is a shallow groove on the adjacent side of the two buttons); Then, you can pull both out. Then, use a knife or flat cone to screw out one of the plastic screws underneath, and then you can move the ceramic toilet lid up.

2. The flushing principle of toilets on the market is basically two categories: direct flushing and siphoning. The siphon type is divided into vortex siphon and jet siphon. There is a complete pipe in the siphon toilet with an inverted "S" in the shape of a side-to-side shape, and the slope of the pool wall is gentle, and the noise problem has been improved; It has the characteristics of strong sewage discharge capacity and large clean surface, so the vast majority of toilets, especially the conjoined ones, are siphon type.

The ceramic lid is placed on top and can be taken off directly.

Well, my family grabbed both sides with both hands, and opened the upper one. I don't know what kind of high-end goods you have.

Normally, the toilet tank lid can be opened by the following steps:1First, confirm the model of the toilet you are using and determine how the lid is secured.

2.If it is screwed, you can use a screwdriver to unscrew the screws, and then gently remove the water tank lid with its head back. 3.

If the buckle is fixed, you need to find the position of the buckle, gently push it open or press, and at the same time lift the water tank cover firmly upwards to remove it. It should be noted that before opening the lid of the water tank, it is best to close the toilet inlet valve first, so as to avoid water splashing out due to improper operation and causing unnecessary trouble. If you are not sure how to do this, it is advisable to seek the help of a professional.