How to open a Roca toilet tank lid

Generally, just uncover it directly. There is no mechanism.

Is there any tape to stick it? You mean that there is a press twist on the top and a water tank lid that are connected and separated from the inside.

The Roca toilet tank lid is opened as follows:

1. First of all, press either of the two buttons (round or half-moon), and pry the other out with a knife or a flat taper (there is a shallow groove on the adjacent side of the two buttons);

2. Then, you can pull both out.

3. Finally, use a knife or flat mouth cone to screw out a large plastic screw underneath, and then you can move the ceramic toilet lid up.

4. Put in the blue bubble, and after 15 minutes, the water will be blue and blue.

First press the round key, you can see that there is a hole under the crescent moon, find a screwdriver to pry it up to the World Bank, get down the round ammonium button, you can see a black round plastic piece of socks, take a screwdriver to loosen it, take it off, the toilet lid can be opened, the order of putting it back is round, crescent alignment, and then the two go down at the same time, and you're done.

In fact, it is very simple, first press the big one, keep it pressed and pry up the crescent-shaped one with something, then pry the big one up, and then unscrew the screw to open the cover.

There is a metal ring under the water tank lid button, twist the garden ring counterclockwise, and slowly loosen it, and then open the toilet tank lid. Then put the toilet cleaner inside.

How to open: 1. Press the round button of the flush button (convenient for picking out the half-moon button), cut out the half-moon button, and then cut out the round button. 2. You will find a big screw, use a screwdriver to screw out the big screw that fixes the sleeve.

3. After pulling out the casing, you can take out the water tank cover.

First, press either of the two buttons, pry the other out with a knife or a flat-nosed cone (there is a shallow groove on the side of the two buttons next to each other), and then you can pull both out. Use a knife or flat-mouthed cone to lift out a large plastic screw underneath, and then you can lift the ceramic toilet seat.

Repair it yourself, it is better to find a professional maintenance company, although it costs a little, but after all, it is professional, and you can learn it yourself by the way in the maintenance process.

Unscrew the top button counterclockwise before removing the lid of the water tank.

There are matching in the large building materials market, and you bring a good size to match.

But the price is much larger than before, 20-70 yuan.

Your toilet is an old style, just try turning the button out.

In three steps:

1. Press the small round button and do not move, take a screwdriver to lift the half-moon button from the small eye exposed at the bottom slightly upward, and then take out the half-moon button;

2. Take out the round button by hand;

3. Use a large Phillips screwdriver to go deep into the middle of the open hole and rotate it counterclockwise, twisting the screw in the middle;

Move it up again and it will open. Finished.

I'm going to remove the button, and there's a screw in it.

Toilet is an indispensable item in home life, once there is a problem with the toilet, it will have a great impact on the life of yourself and your family, so when the toilet problem should be solved in time, so how to open the Roca toilet tank lid? What should I do if the toilet tank can't get water? Let's take a look!

1. How to open the Roca toilet tank lid.

When opening the Roca toilet tank lid, you should first press the toilet bowl round key, find the hole under the button, and pry the hole up with a screwdriver, so that you can remove the round key of the toilet. After removing the toilet bowl round key, find the round black plastic sheet, and use a screwdriver to loosen the plastic sheet, so that the toilet tank lid can be opened.

Second, what should I do if the toilet tank can't get water?

1. Most toilets will install a filter screen in the water tank, due to the long use time, the filter screen will be attached to a positive layer of scale, resulting in the filter screen being blocked, in this case, the toilet tank can not be watered. In this case, you can remove the filter and brush it with a used toothbrush stained with detergent to remove limescale from the filter.

2. When the toilet tank can not be watered, you can open the toilet tank and check the piston inside the water tank, if the piston in the toilet lid tank is broken, it will cause the water in the tank to flow out, in this case, you only need to replace a new piston.

3. The toilet tank can not be filled with water may be because the installation position of the toilet inlet valve is incorrect, resulting in the toilet lid will reach the toilet inlet valve after the lid is closed.

Summary: Roca toilet tank cover how to open the relevant content is introduced here, when there is a problem with the water tank, if you don't know how to repair, you can contact a professional master to repair, so as not to cause secondary damage to the toilet. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.