-
Anonymous users2024-01-23<> if the toilet tank is not watering, you can try the following steps to fix the problem::
Check that the faucet is on. If the faucet is not turned on, the toilet tank will not be flooded. You can try turning on the faucet and see if that fixes the problem.
Check for clogged water pipes. If the water pipe is clogged, the toilet tank will not be flooded. You can try pushing the plug open with your hands or pliers to see if that fixes the problem.
Check the valve for damage. If the valve is damaged, the toilet tank will not be flooded.
-
Anonymous users2024-01-22The problem you're talking about isn't complicated at all, as long as you do the following:
1.You have to make sure that there is tap water, turn on the tap water switch, that is, the angle valve, 2Press the lid of the water tank to open it, and you can see the accessories inside the water tank The toilet tank accessories are generally divided into three parts, the first is the drain valve, which is directly below the lid button, and the second is the water inlet valve, which is the one connected to the hose outside the toilet next to the drain valve, and the third is the button
3 Check that after the toilet lid is closed, will it reach the inlet valve? If so, just adjust the inlet valve and see if the inlet valve's float or float will move up and down freely? This is the key, because if you get stuck, the water will not get in, and generally the floating bucket has an adjustable crosseye that can adjust the height of the floating bucket, and you should be able to rotate it in the direction of the clock, and the problem should be solved
Your toilet is newly installed The current toilet has been tested before leaving the factory It is unlikely that the inlet valve is bad It is mainly caused by improper installation by the installer You can do it yourself If you still don't understand, you can send me a message My Taobao store: Xitao Taobao bathroom home.
-
Anonymous users2024-01-21What to do if the toilet does not go to water.
-
Anonymous users2024-01-20It should be that there is an upside-down thing like a water cup stuck inside, so it would be good to slide down.
-
Anonymous users2024-01-19Open the cover with the button, there's a float inside, and you can see if it's stuck.
What should I do if the toilet does not go to water?
When the toilet does not have water, the first thing is to find the source of the failure, and then find a solution according to the cause. Generally speaking, the toilet does not go to water except for external reasons, such as insufficient water pressure or water stopping, it is the toilet itself, such as the toilet lid is on the top of the inlet valve, or the filter is blocked by a high row. >>>More
1. The toilet is blocked, generally there is a foreign body blocking the flushing pipe, resulting in poor water flow and cannot be flushed, at this time, you should first check whether the sewer pipe is unobstructed, if the sewer pipe is blocked, then let the professional master to overhaul the entire sewer pipe and fully drain the blockage. >>>More
Close the water valve and remove the water inlet to clean up.
1. You have to determine whether there is tap water, and turn on the tap water switch, that is, the angle valve. >>>More
1. What is the reason why the toilet bowl does not stop being watered? >>>More