-
Anonymous users2024-01-241. Look at the weight: because the solid wood door is made of a whole piece of wood or the same kind of wood, the weight is heavier than the general non-solid wood door, and consumers can weigh the weight of the door before installation. However, it is worth noting that some boards such as particleboard are made of wood chips and glued with adhesives, and the actual weight of wooden doors made of this board is not light.
In addition, due to the different size, thickness and core filler of the door leaf, it is also the reason for the different weight of the wooden door. Therefore, specific weight is not the most reasonable basis for judgment.
2. Look at the keyhole: because the locks need to be installed, the general wooden door needs to reserve the keyhole, and consumers can observe whether the wood inside and outside is consistent through the keyhole and whether there are other fillers. However, there are some smart manufacturers who will use solid wood as the support material at the keyhole position, and consumers must learn to screen from many aspects when choosing.
3. Look at the texture: The wood grain on the surface of the pure solid wood door is natural and smooth, while the fake solid wood door often uses surface stickers as finishes. Consumers can carefully observe the surface texture of the wooden door, such as splicing, equal and repeated texture balance, most of this kind of wooden door is not a solid wood door in the sense.
4. Listen to the sound: consumers can knock on all parts of the wooden door with their hands when purchasing, if they find that the timbre is uneven or even hollow, it is definitely not a solid wooden door.
Selling solid wood doors is divided into series, different series of different prices, low-end solid wood doors within one thousand, mid-end solid wood doors two or three thousand, high-end solid wood doors one or two thousand.
The common materials used in office decoration are as follows: >>>More
To put it simply, the solid wood door is relative to the plywood door, the solid wood door is made of a piece of natural log board after processing and splicing, and the inside is solid; The splint door is first made of wooden fangs to make a skeleton, and the two sides are sealed with plywood, and it is easy to distinguish the echo with a hollow hole when you hit it with your fingers.
Before the door sleeve is installed, a percussion drill is drilled in the door opening, and the wooden square is fixed in the door opening with explosive screws. >>>More
The wood used in the wooden door usually requires drying, the moisture content standard of the solid wood door should be less than 12%, if the solid wood dehydration treatment is not passed, after making the wooden door, the door body is easy to deform, the tenon joint is cracked, and the door core plate shrinks and exposes the white. The material standard is the same as other wood products, the processing should be fine, no visible mold eyes, no burrs, Russian stubble, semi-glass, all-glass door glass frame processing should be accurate, and the closing lines are complete. >>>More