How to buy panel furniture?

Look at the size of the size].

When purchasing panel furniture, it is necessary to look at the size of the furniture, the main size of the furniture, and the national standards have specified requirements. For example:

The wardrobe stipulates that the depth of the space in the hanging wardrobe should be 530 mm.

Table furniture is specified in height of 680-760 mm.

The clearance height between the bookcase floors should be 230-310 mm.

Look at the quality of the plate].

When buying panel furniture, it is necessary to look at the quality of the panel:

Carefully check whether the glue is evenly applied on the decorative parts of the edges and surfaces of the plate.

Whether the bond is firm and whether the trimming is smooth and smooth.

Whether the end face of the visible parts such as the side panel, door panel, drawer panel, etc. is edge-banded.

There are no signs of bonding on the well-decorated edge of the panel.

The assembly combination mainly depends on whether the tongue and groove at the drilling hole is delicate and neat, and whether the connector is firm after installation.

Is there a gap between the T-shaped seam after the plane is connected with the end face, and there is no loosening phenomenon when pushed by hand.

Look at the veneer of the edge banding].

When buying panel furniture, look at the veneer of the edge banding:

Look carefully for flaws, the quality of edge banding greatly affects the quality of furniture.

First of all, the advantages and disadvantages of the edge banding material, and secondly, we should pay attention to whether the edge banding is uneven and warped.

A good edge banding should fit perfectly into the entire board.

Look at the hardware connectors].

When purchasing panel furniture, you need hardware connectors, because panel furniture can be disassembled and assembled at will, so the quality of hardware connectors is very important

Hardware connectors are the most intuitive quality standards, good hardware should be opened and closed freely, no noise, and no peeling of the surface plating.

The hardware of some high-end panel furniture is imported, and foreign language logos can be found on it.

Metal parts are required to be dexterous, smooth, and have good surface electroplating treatment, without rust, burrs, etc., and the precision of the matching parts should be high.

The plastic parts should be beautiful in shape, bright in color, and the strength and elasticity of the parts in use should not be too thin.

The opening connector requires flexible rotation, so that the furniture will be smooth and easy to open and use, and there is no frictional sound.

6 major precautions for buying panel furniture:

1.The easiest way to distinguish between paper veneer and wood veneer is to observe the pattern, wood veneer has natural knots, color differences and texture changes, and then there is to touch it with your hands, and the feel is different.

2.Edge banding of panel furniture is very important. It is necessary to pay attention to the advantages and disadvantages of the edge banding material, and pay attention to whether the edge banding is uneven and warped.

In particular, it should be noted that it is not edged on all sides——— although formaldehyde-free adhesives are used, but wood-based panels will have more or less volatile gases in the production process, and the edges are tightly sealed, which is of course good for environmental protection in the room.

3.It also depends on the firmness of the furniture structure. One is the gap between the door cracks and drawer seams of furniture, if the gap is large, it means that the workmanship is rough and will be deformed after a long time; The second is a single box or a double box, usually, in addition to the outer layer of boards, the furniture should also be pasted with a layer of panels, which is called a double box, and the furniture of the double box is both beautiful and strong.

4.The quality of the paint. Does the pigment have streaks? Is the corner paint too thick? Are there cracks or bubbles? These are all to be looked at carefully. You have to ask the salesperson how many coats of paint have been applied to the furniture. Of course, the more times you go on it, the better.

5.One of the best ways to do this is to carefully observe the hinge groove and the hole, where the internal structure is exposed, to see whether particleboard or MDF is used.

6.The use of hardware and the ability to disassemble and assemble at will is the biggest advantage of panel furniture, so the quality of the connector is closely related to the quality of the whole furniture. Imported furniture is expensive in these details.

It is a common way to judge the quality of a piece of furniture from the material, texture, hardware, firmness and other aspects of the furniture. Panel furniture is mostly made of composite materials, so there is a certain gap in the service life compared with solid wood furniture, so more attention should be paid to maintenance.

A brand, as a major furniture producer, there are hundreds of first-line brands alone, not the most expensive is the best.

Second, look, the plate must have the thickness of the finch belt, especially the standing Zhengshan, load-bearing, generally more than 18mm.

Third, the smoothness of the surface of the plate, especially the embedded parts. You can pick it with your fingers, and don't buy the slag.

Fourth, the furniture city has a big smell, be careful, smell the inside of the furniture, the inside of the drawers. It's better to have just unboxed.

5. Commitment, any product after-sales is important, must be seen in words.

Happy Year of the Rabbit!

Now buy furniture is the most particular is environmental protection, to determine if you want to buy a plate ruler dismantling tool or choose a well-known brand of Ling Nai Zao, choose a manufacturer with the ten rings certification issued by the State Environmental Protection Administration, Ruyifeng, Fuzhidao, Red Apple, Ou Rui, etc. Because the plate used in the panel furniture will contain more glue, the bad glue will be more formaldehyde than the paint, saying that the edge of the panel furniture must be good

Float by, do the task, sorry!