How to buy panel furniture?

1. Distinguish whether paper veneer or wood veneer is used for panel furniture.

2. Pay attention to the advantages and disadvantages of edge banding materials, and pay attention to whether there is unevenness and warping of edges.

3. It also depends on the firmness of the furniture structure.

4. Of course, the quality of the paint also matters.

5. From the hinge groove and the hole, it can be seen whether the wood used for the board burning Huai's leather loose furniture is medium density or particleboard.

The above is collected from the source of Shanghai Ming Stool, I hope it will be useful to you.

With the continuous development of the furniture industry, more and more novel styles of furniture appear in front of us, but now consumers in the purchase of furniture, not only pay attention to the style of furniture, but more and more attention to whether the furniture is environmentally friendly, whether it affects health. Therefore, environmental protection furniture has gradually been paid attention to, for which Kunshan Diying Composite Materials Co., Ltd. has developed a "Debaowei" hollow sandwich (similar to honeycomb structure) wood-plastic furniture board with independent intellectual property rights, so what is the hollow sandwich wood-plastic, board, what are the advantages of furniture made of hollow sandwich wood-plastic board?

Hollow sandwich WPC panel is made of two thinner WPC panels, which are laminated on both sides of a thick layer of "honeycomb" WPC core material by hot rolling, also known as honeycomb sandwich structure. Its main material, wood-plastic composite material, which has the composite function of wood and plastic compared with more and more scarce solid wood, does not absorb water, does not mildew, is resistant to aging, acid and alkali, insect repellent, easy to color, easy to process, non-toxic, tasteless, zero formaldehyde and other characteristics; The performance indicators can be comparable to hardwood, the appearance and feel are similar to natural wood, and it can be sawed, planed, drilled, and has strong nail holding power. It is the preferred furniture panel in the panel furniture of the future.

Today's panel furniture is mostly made of MDF, which is highly susceptible to damage during transportation. The hollow sandwich wood-plastic panel has light weight, high strength, high rigidity, cushioning, seismic isolation and other functions, so it is very suitable for use in panel furniture, and at the same time, it has the characteristics of concise lines and diverse colors of other panel furniture. For example, it can be used for side panels, panels, top panels, partitions, door panels, partitions and some decorative parts with a thickness of more than 18 mm.

The thicker the board, the more it can show the superiority of the hollow sandwich WPC, and the thick plate also has good bending characteristics, which is not easy to be damaged during transportation. The most important thing is that the furniture made of "Debaowei" laminated wood-plastic board can also be 100% recycled, which can save a lot of forest resources, protect and improve the ecological environment, and is a new environmentally friendly material in line with the theme of today's social development.

Due to the outstanding performance characteristics of "Debaowei" laminated wood-plastic furniture panels, it will inevitably cause a board revolution in high-end furniture panels. The high-end panel furniture made of "Debaowei" laminated wood-plastic panel will surely become the first choice of many consumers. Seize "Debaowei", you will firmly hold the market of the future.

Now, panel furniture has swept the furniture market and is deeply loved by consumers. However, many consumers are not very clear about how to choose panel furniture, so they have made some introductions.

They say that the so-called panel furniture refers to furniture made of wood-based panels, with various veneers, edge banding, and painting modification. It is characterized by the scientific arrangement of wood-based panels and wood in different parts of the furniture, which is conducive to saving wood, especially precious wood, and the appearance of its good products is not inferior to solid wood furniture. It has three advantages:

One is the effective use of trees, the second is the fast production cycle, and the third is environmental protection. There are five aspects to pay attention to when buying panel furniture.

1. Brand. To choose products from well-known brands or professional manufacturers, it is necessary to check the quality certification and environmental protection product certificate.

2. Workmanship. It is necessary to pay attention to check whether the product is finely worked, the board surface is smooth, no damage or pollution, the color is uniform, the splicing is tight and firm.

3. Plates. It should be noted that high-quality MDF is mostly used for good furniture, and the material fiber is treated with high temperature and high pressure, with a smooth surface, good bending resistance, and not easy to deform.

4. Paint. The paint used in good products has good stability, high flatness, comfortable feel, lead-free, and not easy to change color.

5. Hardware. The doors and tracks of good products should be quiet, soft, smooth and have a long service life when used; The handle has high strength, good bending resistance, and chrome plating on the surface makes it not easy to oxidize, rust and decolorize.

It's very comprehensive. It's just that the color of the real environmentally friendly board after cutting is not pure white and a little reddened. Large particles are the most important, avoid the surface and edge 2 details. Didn't add it.

The landlord is here to advertise that he knows a lot, right? In fact, you are talking about how to choose panel furniture, which is too one-sided, right? Plate?

Paint? Structure? The overall effect?

Size? Didn't say anything. Also, if you are empty-handed, how can you know the formaldehyde content of the board?

Substrate? It's covered with a veneer, and when the paint seals it, you can tell if it's plywood or fiberboard or particleboard. Or solid wood?

Listen to the merchants?? No business, no treachery! Immature!

[Look at the size of the size].

When purchasing panel furniture, it is necessary to look at the size of the furniture, the main size of the furniture, and the national standards have specified requirements. For example:

The wardrobe stipulates that the depth of the space in the hanging wardrobe should be 530 mm.

Table furniture is specified in height of 680-760 mm.

The clearance height between the bookcase floors should be 230-310 mm.

Look at the quality of the plate].

When buying panel furniture, it is necessary to look at the quality of the panel:

Carefully check whether the glue is evenly applied on the decorative parts of the edges and surfaces of the plate.

Whether the bond is firm and whether the trimming is smooth and smooth.

Whether the end face of the visible parts such as the side panel, door panel, drawer panel, etc. is edge-banded.

There are no signs of bonding on the well-decorated edge of the panel.

The assembly combination mainly depends on whether the tongue and groove at the drilling hole is delicate and neat, and whether the connector is firm after installation.

Is there a gap between the T-shaped seam after the plane is connected with the end face, and there is no loosening phenomenon when pushed by hand.

Look at the veneer of the edge banding].

When buying panel furniture, look at the veneer of the edge banding:

Look carefully for flaws, the quality of edge banding greatly affects the quality of furniture.

First of all, the advantages and disadvantages of the edge banding material, and secondly, we should pay attention to whether the edge banding is uneven and warped.

A good edge banding should fit perfectly into the entire board.

Look at the hardware connectors].

When purchasing panel furniture, you need hardware connectors, because panel furniture can be disassembled and assembled at will, so the quality of hardware connectors is very important

Hardware connectors are the most intuitive quality standards, good hardware should be opened and closed freely, no noise, and no peeling of the surface plating.

The hardware of some high-end panel furniture is imported, and foreign language logos can be found on it.

Metal parts are required to be dexterous, smooth, and have good surface electroplating treatment, without rust, burrs, etc., and the precision of the matching parts should be high.

The plastic parts should be beautiful in shape, bright in color, and the strength and elasticity of the parts in use should not be too thin.

The opening connector requires flexible rotation, so that the furniture will be smooth and easy to open and use, and there is no frictional sound.

Method steps.

Selection of substrate At present, the substrate of the panel wardrobe mainly has 1Solid wood particle board (known as particleboard) 2MDF (known as MDF) is the most used in custom wardrobes, you can take a look at its cross-section, relatively loose, but as a wardrobe is completely sufficient, because, the wardrobe is to stack or hang clothes, do not need too high load-bearing.

The difference between MDF and particle board is that MDF is made of wood fiber, the raw material is finer, and the board made is more compact, so its load-bearing capacity is better, and some load-bearing furniture, such as wine cabinets and bookcases, will use this kind of board, but it is also because of its high density, so the glue content is larger, and some people are worried that it is not environmentally friendly as particle board In fact, I personally think that in addition to the impact of the substrate in terms of environmental protection, there is also an important point is edge banding technology.

Look at the frame of the panel furniture inside the hardware is very important, take the wardrobe as an example, the most important thing is on the door, because the service life of the door directly affects the service life of the wardrobe, and the endless service life determines the life of the door. The frame of the wardrobe door is all metal, so we need to know the thickness of its section, which is generally fine to a micron. The frame is equipped with anti-collision strips, there are rubber and fiber, this depends on personal preferences, but there is a point It is best not to use glue here, so it is more environmentally friendly.

Top and bottom wheels These two are very important Generally, big brands of hardware will have brand logos on them, and I also have pictures, but they have been ps. The wheels are best closed to try, so that they do not enter the dust, the service life is longer, the material of the wheels is less than nylon, and the better ones are glass carbon fiber.

Track The track must be smooth and well matched with the bottom wheel to smooth the wardrobe door and the service life of the door can be longer.

The role of the wardrobe is to put clothes, but everyone's living habits are different, each family pattern is not the same, a good pattern is to make the wardrobe not only to coordinate with the whole house, but also to meet the owner's habits of storing clothes.

Color The wardrobe plays an important role in the bedroom, so its color has a great impact on the overall color balance of the bedroom, which requires you to choose a suitable color for yourself or the designer.

One is the gap between the door cracks and drawer seams of furniture, if the gap is large, it means that the workmanship is rough and will be deformed after a long time;

The second is a single box or a double box, usually, in addition to the outer layer of boards, the furniture should also be pasted with a layer of panels, which is called a double box, and the furniture of the double box is both beautiful and strong. The quality of the paint. Does the pigment have streaks?

Is the corner paint too thick? Are there cracks or bubbles? These are all to be looked at carefully.

You have to ask the salesperson how many coats of paint have been applied to the furniture. Of course, the more times you go on it, the better. One of the best ways to do this is to carefully observe the hinge groove and the hole, where the internal structure is exposed, to see whether particleboard or MDF is used.

The use of hardware and the ability to disassemble and assemble at will is the biggest advantage of panel furniture, so the quality of the connector is closely related to the quality of the whole furniture. Imported furniture is expensive in these details.