Measure the heating wire of the toilet tank with a multimeter

Updated on Toilet 2024-06-27
1 answers
  1. Anonymous users2024-01-24

    The heating wire is generally only a few tens of ohm resistance, and it is measured at the 200 position of the resistance gear to see if there is resistance.

Related questions
Q Measuring single-phase motors with a digital multimeter (hair dryer under the hotel kitchen, used
5 answers2024-06-27

There are errors, and the resistance value measured with a multimeter is not accurate at all, only a rough measurement, as long as the measurement is not broken, it is good! >>>More

Kitchen socket tripping with a multimeter to test the ground wire The live wire is connected, and th
1 answers2024-06-27

There is a short circuit between the two lines.

The two wires can be used as one, and the ground wire can be used as the zero line temporarily. >>>More

Can the multimeter voltage measurement live ground 240 smart toilet work normally?
3 answers2024-06-27

There is no problem at all, the smart toilet 220-250 can be used.

The light in my kitchen is not on, and I use the multimeter AC block to detect that the line of the
2 answers2024-06-27

The low line voltage in the kitchen is due to other loads being skewed into the wiring. If the contact is corroded, it becomes a resistor invisibly. The grid voltage passes through this resistance to form a certain voltage drop. >>>More

How to check the toilet socket circuit at home is not universal multimeter
1 answers2024-06-27

Check the voltage of the live wire to the neutral line and the voltage of the live wire to the ground wire. >>>More