There is a water meter behind the toilet sewer pipe, how to measure the pit distance, I am very anxi

The tube can be extubated and fixed on the wall with a clip, and the tube will be firm and not easy to break.

Look at the kitchen water pipe comes out from that direction, most of the water pipes are straight, if it comes from the bottom, don't think about stopping the water pipe. If it is coming up and down, you need to look at the direction of the pipe from the top of the kitchen to make sure that it is not in the position to be drilled. >>>More

There is no good solution, and the common method used by workers is to break up the cement with a stick, then flush it with a lot of water before installing the toilet. But be careful not to break the pipes.

The height of the sewer pipe needs to be raised.

Prepare a suitable diameter of the pipe directly, a new pipe and PVC glue, clean the original PVC pipe out of 3cm length, use special glue to dock the original pipe and the new pipe, the nozzle is 2cm higher than the floor tile floor, and the surrounding area is filled with plugging spirit, and the toilet is reinstalled. >>>More

After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test. Regardless of these basically experienced masters, they know that the bathroom installation master who is looking for Master Wan does not need to consider these problems at all, and the more experienced master will basically do. >>>More