-
Anonymous users2024-01-24First of all, you need to remove the colloids around the stone slab, leaving only the viscose at the junction, so that the side of the stone is pushed outward, with the increase of the gap, the hand can move to the junction, because the stone has a certain toughness and strength, the stone will fall off from the junction, the main force is a skill, can not use brute force.
The tile can be processed into an arc type according to the shape, and the joint at the junction is more serious, and the effect is also good.
This gap is not too large, generally around 5mm. You can first let the painter use putty to batch it, and after the roller brush latex paint is finished, use translucent or neutral glass glue close to the color of the stone to do the sealing treatment. In this way, the cracks in this part can be covered, and the thickness of the glass glue is uniform, which makes the seam more beautiful.
1. At the joint between gypsum board and gypsum board, the double-layer gypsum board process is used to make the gap of gypsum board on the gypsum board, and then fill it with caulking gypsum, so that the thermal expansion and contraction coefficient of the same material is close, and then paste it with caulking tape to avoid cracking at the joint. >>>More
Gypsum powder is mixed with white latex or polyethylene glue, but there are anti-cracking products on the market that do not need to be adjusted, but the price is relatively high. And the effect is not as good as gypsum powder, fill the gaps after adjusting evenly, and then paste gauze tape on the outside (kraft paper is better than gauze tape, there is a new type of fiberglass mesh belt), and then scrape putty.
1. It is forbidden to take fully enclosed pillars in the main gas pipeline. It is inconvenient to overhaul and easy to have potential safety hazards. >>>More