-
Anonymous users2024-01-23The installation process is not complicated, and the hinge installation is easy to operate.
The installation process of the hinge is relatively simple, after the tool is prepared, the position is measured and positioned, and the hinge is fixed to basically complete the installation, and netizens can also install it at home.
1. Prepare tools.
Prepare special installation tools before installation, such as a tape measure and level for measuring, a carpentry pencil for line drawing and positioning, a carpentry hole opener for hole opening, a pistol drill, a screwdriver for fixing, etc.
2. Draw lines for positioning.
First, use the installation measuring board or carpentry pencil to mark the positioning (the drilling margin is generally 5 mm), and then use a pistol drill or woodworking hole opener to punch a 35 mm hinge cup mounting hole in the door panel, and the drilling depth is generally 12 mm;
3. Fixed hinge cup (hinge product).
Put the hinge into the hinge hole on the door plate and fix the hinge cup with self-tapping screws;
4. Fixing the base.
After the hinge is embedded in the door cup hole, the hinge is opened, and then the side panel is inserted and aligned, and the base is fixed with self-tapping screws;
5. Debugging effect.
The last step is to open and close the cabinet door to test the effect.
The general hinges can be adjusted in six directions, aligned up and down, the two doors are moderately left and right, and the most ideal effect of the cabinet door debugging is better, and the clearance after installing and closing the door is generally 2 mm.
Of course, the cushion hinge is good, and it is not easy to pinch the child's finger if there are children at home.
It is difficult to judge without a specific diagram. Generally, door hinges cannot be replaced by hinges. Because the door hinge can achieve the effect of full cover, half cover and no cover. But the hinge can only achieve the effect of not covering.
The number of cabinet links should be determined according to the actual installation experiment, and the number of hinges used for the door panel depends on the width and height of the door panel, the weight of the door panel, and the material of the door panel. For example, if the height is 1500mm and the weight is between 9-12kg, 3 hinges should be used. >>>More
First of all, I come to the door to cover the distance from the section and use it. >>>More
1. Look at whether the surface material of the product is flat, if you see the scratch, it is produced from waste materials (leftovers), this kind of hinge has an ugly appearance, so that your furniture is no grade. Most of the surface treatment hinges are nickel plating, and now due to the low cost of many JS, only a thin layer of nickel is plated, and the hinges with good quality should be plated with a layer of acid copper before the nickel layer, which can achieve a certain anti-rust effect. >>>More