How to adjust the hinges on the door after furniture installation?

First of all, I come to the door to cover the distance from the section and use it.

The screwdriver buckles the screw to turn to the right, the door coverage distance will become smaller, the screw turns to the left and the door covers the distance from the door to become larger, and then the depth is directly and continuously adjusted through the eccentric screw, and the height can be accurately adjusted by adjusting the hinge base, and finally it is to rotate a circle of hinges to adjust the screw to adjust the spring force, and a part of the hinge in addition to three-dimensional adjustment, also needs to adjust the closing force of the door, generally based on the maximum force required by the tall and heavy door.

The front one is used to adjust the left and right movement of the door panel (front), and the back one is the fastening screw, and at the same time, the front and back movement of the door panel can be adjusted after being released, (you can observe that there is a gap behind the hinge), and it should be tightened after the adjustment is completed.

2. Selection of the number of hinges.

The number of cabinet links should be determined according to the actual installation experiment, and the number of hinges used for the door panel depends on the width and height of the door panel, the weight of the door panel, and the material of the door panel. For example, if the height is 1500mm and the weight is between 9-12kg, 3 hinges should be used.

3. Hinges that match the shape of the cabinet:

Cabinets with two built-in rotatable baskets need to fix the door panel and door frame at the same time, and most importantly, because the built-in basket determines that it should be opened at a very large angle, so that the curvature of the hinge must be large enough to ensure that the door can be opened freely to the right angle for easy access to any item.

4. Selection of hinge installation method:

The door is opened according to the position of the side of the door and the side panel, and there are three installation methods: fully covered door, half covered door and embedded door. The fully covered door basically covers the side panels; The half-cover door covers half of the side panel, which is especially suitable for cabinets with a partition in the middle and more than three doors need to be installed; The recessed doors are housed in the panels on both sides.

5. The whole process of cabinet door hinge installation

Hinge cup installation method.

Hinge mounting.

Door hinge mounting.

6. Adjustment of the door panel

By loosening the set screw on the hinge, slide the hinge position back and forth, and there is an adjustment range. After the adjustment, the screws must be re-tightened.

Forward and backward adjustment of ordinary hinge: By loosening the fixing screw on the hinge, slide the hinge arm position back and forth, and some adjustment ranges. After the adjustment, the screws must be re-tightened.

Forward and backward adjustment using the cruciform quick-release hinge: This cross-shaped quick-release hinge has a screw-driven eccentric cam that can be adjusted up to + by turning the cam without the need to loosen other fixing screws.

Forward and backward adjustment using a slotted quick-release hinge: This slotted quick-release hinge has a screw-driven eccentric cam that can be adjusted by turning the cam to the range of +, without having to loosen other fixing screws.

Door panel side adjustment: After the hinge is installed, the door margin should be before any adjustment is made. In this way, the adjustment screws on the hinge arm can be adjusted in the range of +. If thick door hinges or narrow door frame hinges are used, this parameter range is reduced to:

The above content is the introduction of the installation method of the cabinet door hinge, I hope that through the introduction of the above content, we have a certain understanding of any installation hinge, and you can also install the cabinet hinge, and the hinge can be replaced by yourself if the hinge is damaged.

After the wardrobe door hinge is properly installed, it needs to be constantly adjusted to make the door installed in the best position.

dao1, wardrobe door coverage distance adjustment version: use a screwdriver to twist the screw to the right, the door needs to cover the distance to become smaller (-) wardrobe door coverage distance becomes larger (+) 2, depth adjustment:

Direct and continuous adjustment can be made by means of eccentric screws. 3. Height adjustment: The height can be adjusted precisely through the hinge base with adjustable height.

4. Spring force adjustment: some relatively large hinges in addition to the common three-dimensional adjustment, can also adjust the door opening force, commonly in the tall and heavy wardrobe door required maximum force as the base point, if it is applied to the narrower door and glass door, you need to adjust the spring force. By rotating the hinge adjustment screw, the spring force can be reduced by up to 50%.

When there is noise in our wardrobe door, we can adjust it by adjusting the screw to turn left and weaken the spring force. When our wardrobe door cannot be closed well, we can turn right by adjusting the screws to enhance the spring force and make the door close better.

Steps for installing the hinges of the wardrobe door.

Use a screwdriver to loosen the screws of the door hinge in the counterclockwise direction; Divide the wardrobe door hinge into two separate parts, and we divide it into A and B. As shown in the figure, place part A at the corresponding position of the door hinge hole. Use matching screws to install Part A on the door panel with a screwdriver.

, place the door hinge part B on the corresponding position of the side panel, use a screwdriver to install the part B on the side panel. The spring force is then adjusted by adjusting the screws.

Is there a problem with this? If that's okay, you don't need to tune it.