Kitchen brick grease trap offer

Grease trap: It is to use the different densities of suspended solids and water in wastewater to achieve the purpose of separation. The structure of the grease trap mostly adopts advection type, and the oily wastewater enters the grease trap with a rectangular plane through the water distribution tank, flows slowly along the horizontal direction, floats on the surface of the oil product in the flow, and is pushed to the oil collection pipe by the oil collection pipe or the oil scraper arranged on the pool surface and flows into the dewatering tank. >>>More

Of course I want it, the hot pot restaurant uses the most oil, if you don't need to explain the recycling, you will go to the pot again, haha.

Like some large canteens and restaurants, a large amount of oily sewage can be discharged every day. Such a discharge would cause enormous damage to water resources. Therefore, in order to guarantee our water resources, it is stipulated that the catering industry must install catering grease traps. >>>More

The structure of the grease trap is generally made of brick concrete and steel concrete, depending on your requirements. The grease trap design is generally advection design, with a minimum length to width ratio of 4:1, generally divided into 2-4 grids, the length of each grid is not more than 6 meters, and the design water depth is not more than 2 meters. >>>More

The grease trap is a filter tank set up in the sewage system with public canteens, restaurants, etc. approved by the plan according to environmental protection requirements. >>>More