How to install the toilet lid of the Milan arrow

1. The two rings shown in the figure below are the positions of the two fixing holes; >>>More

If the toilet is not installed, you can install the toilet lid on the back of the toilet, which is more convenient and convenient to install, but if the toilet has been installed and fixed, it is necessary to dig out the installation from the back side, which is more awkward, but it can only be installed in this way.

1. How to disassemble the Wrigley toilet lid 1. When disassembling, you need to find the screws that fix the toilet lid first, and under normal circumstances, it will be fixed on both sides under the toilet lid, and after finding it, you can use a screwdriver to loosen the fixed screws; Then remove the toilet seat, choose a new toilet seat of the same model, and install it on the toilet according to the requirements. Second, what problems are easy to occur in the process of using the toilet 1, the problems that are easy to occur in the process of use, mainly the problem of toilet blockage is very common, if there are more foreign objects in the toilet, then it is easy to cause blockage when flushing the toilet, you can use the toilet plug to flush the blockage, or use the toilet dredge agent to pour into the toilet, and then flush it down with water. 2. The flush valve of the toilet is also prone to damage, once damaged, it also needs to be replaced in time, you need to understand the size of the original flush valve, and then replace it with a size and specifications.

How to disassemble the Wrigley 1279 toilet lid Hello dear, first turn off the power and water valve, and then gently unscrew the water filter, if there is dirt on the water filter, brush it clean with a toothbrush. When washing the sprinkler, pull out the sprinkler with your hand and hold it tightly, and scrub it with a soft cloth while draining the water. Hope it helps. >>>More

How to install the toilet seat? Come and take a look, but don't say you won't install it.