How to remove the Wrigley toilet seat

How to disassemble the Wrigley 1279 toilet lid Hello dear, first turn off the power and water valve, and then gently unscrew the water filter, if there is dirt on the water filter, brush it clean with a toothbrush. When washing the sprinkler, pull out the sprinkler with your hand and hold it tightly, and scrub it with a soft cloth while draining the water. Hope it helps.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Now many families use Wrigley toilets, but after a long period of use, it is inevitable that the toilet lid will be damaged, if the damage is more serious, the toilet cover needs to be replaced, so how to remove the Wrigley toilet cover? What are the common faults of the toilet and their solutions? Let's take a look!

1. How to disassemble the Wrigley toilet seat.

When disassembling the Wrigley toilet cover, you should first find the screws used to fix the toilet cover, the fixing screws of the Wrigley toilet lid are generally on both sides of the back and bottom of the toilet, after finding the fixing screws of the toilet cover, the fixing screws can be removed by unscrewing the toilet cover, and the fixing screws need to be saved after disassembling the toilet cover, so as not to find the fixing screws when installing the new toilet cover.

2. What are the common faults and solutions of the toilet.

1. The toilet is often blocked during use, when encountering this problem, you can put the caustic soda into the hot water, pour it into the toilet bowl and wait for about ten minutes after the caustic soda is melted with the water, the toilet can be dredged, or you can use the recommended toilet to dredge, if the problem of toilet blockage is still not solved, you can find a professional to dredge.

2. When the toilet is used, the flush valve is often damaged, and when this situation occurs, it is necessary to replace the new flush valve, but before replacing, the size of the flush valve must be determined first, and you can also directly bring the damaged flush valve to the store for purchase, so as not to match the size of the purchased flush valve with your own toilet.

3. Water leakage is also a common problem encountered in the use of the toilet, in this case, you can check the float of the toilet first to see if the float has the problem of water ingress or damage, if there is a problem of water ingress, the water in the float needs to be discharged, but if the float has been damaged, the float should be replaced with a new one.

Summary: How to disassemble the Wrigley toilet lid is introduced to you here, the toilet will inevitably be expensive after a long period of use, especially the toilet cover, learn how to disassemble the toilet lid yourself can save a lot of trouble and cost, so it is necessary to learn how to disassemble the toilet seat. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

1. The two rings shown in the figure below are the positions of the two fixing holes;

2. There are two plastic nuts at the bottom of the toilet bowl to fix the two shafts, which can be seen from below;

3. Unscrew the two nuts on both sides separately, and you can unscrew them by hand, which is not very tight.

4. After the toilet lid is loose, you can take off the entire toilet seat.

Precautions Pay special attention to where you will be lifting the toilet bowl with your hands, as the toilet bowl is made of ceramic and will cut like glass. So wear thick work gloves when moving the toilet. Pick up the tank lid again – remove the tank lid and get the lid out where it won't touch.

Answer: To remove the toilet lid, first observe the bottom of the left and right sides of the toilet, and you can find two plastic screw-shaped, two plastic nuts that hold the two shafts in place. Remove the nuts on both sides respectively, you can unscrew them by hand, they are not very tight, you can clamp them down with the help of pliers, and you can press and hold the upper baffle when you screw it, so as not to rotate. After screwing it, the lid is loosened, and it is removed by lifting it up by hand.

How to change the toilet seat Method 1:

We all know that many toilet seats in the home are fixed with screws, at this time, we only need to find the screw cap, and then use a wrench to remove the screws, and then replace them with new ones. It needs to be remembered that the screw cap installed in the open place is easy to unscrew down directly, but the screw cap installed in the dark place is difficult for us to see, and it is generally on the side of the water tank in the toilet.

Toilet seat replacement method 2:

If the toilet lid installed in your home is fixed and installed with fixed screws, then it is very convenient to replace the toilet cover, generally directly remove the fixing bolts at the back of the toilet bowl to remove the toilet cover, but this kind of toilet cover when choosing to replace, you must pay attention to the size of these, to prevent yourself from choosing the wrong one, and you can operate in the opposite direction when you tighten the screws during installation.

Toilet seat replacement method three:

When encountering different styles of toilet covers, the installation methods it needs are also different, and there is a kind of toilet that is fixed with screws at the bottom end of the lid and the toilet bowl, so at this time, you need to reach down to the back of the toilet to find the screws on both sides and unscrew it, and then take the lid off to replace the toilet cover, which is also the simplest.

There are no screws in the question.

Please like it, thank you.