How to replace the bulb for the ceiling lamp in the bathroom

Updated on Bathroom 2024-05-16
2 answers
  1. Anonymous users2024-01-24

    Such a ceiling light, if there is a gap at the top, see if there are screws, there are, there should be about 3, the left hand holds the cover (so as not to fall), and the right hand uses the screw to loosen the screw to remove the cover. If there are no screws, most of them are buckled on the lampshade, hold the lampshade with both hands, rotate it appropriately from side to side to see if it is loose, and rotate it to the loose direction to take it off. Judging from your picture, it is likely that you can remove it by holding up the transparent cover.

  2. Anonymous users2024-01-23

    It is recommended to find a professional to change the reliable point, you can study when you change, by the way, see what the bulb inside is like, and you can change it yourself if it is broken in the future.

Related questions
2 answers2024-05-16

Method: Place the ceiling lamp with three plastic cards.

The buckle is opened, and the three are evenly distributed in the circumferential position of the lamp base, and the lamp is removed. >>>More

3 answers2024-05-16

Ceiling lamp is a kind of lamp, which is generally installed in bedrooms and living rooms, such as adsorbed on the roof, so it is called ceiling lamp. Ordinary round ceiling lamps are generally dragged to the left and right of the lampshade to screw, if it is square, it is buckled, find the gap between the lampshade and buckle hard. There is also a clamp on the top of the lampshade, and the card is sat on at the end, and the clamp is pulled over by hand and the lampshade is directly down. >>>More

1 answers2024-05-16

Hello On the four straight sides of the lamp, there is a right-angle slide plug (reach out to the lamp around and touch it), break the four slides outward, the lampshade will be taken off, and you will naturally install it.

3 answers2024-05-16

1.The first step in changing the bulb is to disassemble and unload the ceiling lamp, you need to grasp the frame of the ceiling lamp, and pull the frame down until you see the spring inside, and then press the spring in the direction of the ceiling, so that you can remove the ceiling lamp. If you can't remove it according to the above method, then try to remove the square gusset next to the ceiling lamp. >>>More

4 answers2024-05-16

Generally, there is a hook around the lampshade of the square ceiling lamp to talk about the lampshade on the low plate of the lamp, you touch it counterclockwise with your hand on the roof, you should be able to touch the judgment skin, open the four hooks, you can see the lamp and the lamp card = mouth, dig the difference to remove the bulb and replace it.