Chandelier is installed in the ceiling of the living room, how to reinforce?

Chandelier installation: Large chandeliers are often installed under the floor slab or under the beam of the structural layer through booms or slings, and small chandeliers are often installed on the joists.

Direct top method: directly through the boom of the ceiling surface, the drilling position of the board surface is not easy to find when installing. You can also install the boom first and then find the hole on the ceiling cover panel, which will have an impact on the decorative effect when it is not right.

Casing method: first open the casing hole at the corresponding position on the top surface of the ceiling, and the boom is worn out from the casing, so that the boom has a room for movement, and the decoration is also more beautiful.

The boom should have a certain length of thread for height adjustment, if the boom or sling is suspended under the light box, attention must be paid to the connection firmly.

Chandelier refers to a high-grade decorative lighting that is hoisted on the ceiling of an interior. Chandeliers, whether hung with wires or iron supports, should not be hung too low to obstruct normal vision or make people feel dazzling.

There are several types of crystal chandeliers and crystal lamps: natural crystal cutting chandeliers, heavy lead crystal blow molding chandeliers, low lead crystal blow molding chandeliers, crystal glass mid-range chandeliers, crystal glass pendant chandeliers, crystal glass die-casting cutting chandeliers, crystal glass strip chandeliers, etc.

Most of the crystal lamps on the market are made of crystal, but the materials used in crystal are different, high-quality crystal lamps are made of high-tech materials, and some shoddy crystal lamps even use plastic as crystal materials, and the light and shadow effect is naturally very poor. Therefore, when buying, you must carefully compare and identify carefully. Generally, there are two kinds of crystals commonly used: K5 and K9.

If you want to reinforce, you must pay attention to your screws, and you must tighten them a little tighter.

There is a fixed structure, and because the skeleton of the ceiling is relatively strong, it is easy to fix.

Generally speaking, it is necessary to choose something very strong to reinforce.

If you put it in the living room, you really need to strengthen it, otherwise it will be very dangerous.

The best choice of chandelier is not to choose a chandelier that is too heavy, because there are certain safety hazards even if it is reinforced.

If you want to strengthen it more stable, then put it in a higher place.

Write more reinforcement things, if you don't understand, you can go to the lamp shop to consult.

You can decorate it with good materials at the time of installation, so as to prevent problems before they occur.

1. Prepare the installation tools.

If we want to install a ceiling light, we must first prepare the installers we need, such as: impact drills, electrician's pliers, screwdrivers, insulating tape, a small piece of wood, a wooden ladder, etc.

2. Determine the location of the ceiling light in the living room.

Before installing the ceiling lamp in the living room, you need to determine the installation location, which is generally installed in the center of the living room or above the coffee table. Straight incandescent or fluorescent lamps are usually installed in the front part of the cabinet, so that part of the light emitted by the lamp will be reflected to the backsplash and reflected to the worktop and to the center of the space.

3. Dismantle the ceiling lamp mask in the living room.

After the mask is removed, the lamp tube is also removed. In general, there are two ways to fix ceiling lamp masks: rotation and snap. When removing the mask of the ceiling light in the living room, care needs to be taken to prevent damage to the ceiling light in the living room.

4. Install the ceiling lamp base in the living room.

Thread the previously reserved wire into the wire hole of the base, hold the base of the ceiling lamp with one hand, fix it in the position to be installed, use a screwdriver to screw one of the screws into the empty position, note that it does not need to be tightened too tightly here, so that when the position is not found to be accurate later, it is convenient to move the position, adjust the position and place it correctly.

5. Connect the wires.

After we fix the base, we can connect the power cord with the wiring base of the ceiling lamp in the living room, pay attention to the two wires connected with the power cord of the ceiling lamp, the electrical contact should be good, for the safety of electricity in the future, we also need to wrap it with black tape respectively, and keep a certain distance.

6. Install the mask of the ceiling in the living room.

Mask installation is the final step in installing a ceiling light in your living room. Usually after connecting the wires, you can first try whether the lamp can be used normally, and after careful inspection, you can install the mask of the living room ceiling lamp, after the mask is installed, the installation process of the entire living room ceiling lamp also ends here.

If you want to strengthen it more stable, this is generally to choose something very strong to reinforce.