-
Anonymous users2024-01-24Kitchen electricity is generally more powerful, at least 4mm wires should be used, the socket is best with a switch to facilitate use and avoid frequent plugging, the socket is loose, the socket layout is to follow the location of the electrical appliances as much as possible, and the line layout should be arranged on the wall as much as possible, and the line pipe should not be arranged on the ground. The layout of the water pipe can also go to the top surface and go to the top surface without going to the ground, so as not to cause greater losses due to leakage and bricking, which can be determined according to their own economic situation, and the water pipe will increase a certain cost if it goes to the top surface.
In fact, the main thing is to see whether the ground cement screed is qualified: the first step should be to pave the uneven ground of the original house with cement mortar, and the kitchen and bathroom should have a slope, and the slope is also very particular. >>>More
It is necessary to pay attention to follow the principle of "walking to the top and not to the ground, and walking vertically but not horizontally" as much as possible. >>>More
Position: General switch.
Both are opened and closed with one hand in the opposite direction, and the right hand is used to replace the left hand. Therefore, most of the switches in the general home are installed in the door. >>>More
The refrigerator does not need a sewer pipe, only needs a three-phase power supply, and there must be a power socket in the cabinet, and small household appliances such as ovens, microwave ovens, blenders, and juicers all need power sockets. >>>More
Shanghai Panda Home Decoration reminds you:
Generally, the living room only walks the circuit, and the waterway rarely walks! The first problem is that the pipe fittings and wires should be of good quality! The quality of buried pipe fittings is not good, and it is very troublesome to repair if there is a problem! >>>More