The home decoration waterproof is not done, and the wall skin outside the bathroom has fallen off, h

I don't know the location of the wall skin you said, if the wall skin on both sides of the bathroom door falls off from the ground, it means that the waterproof node of the door stone is not done, this is more troublesome, you must remove a few bricks next to the door stone in the bathroom, and then plug the gap between the two ends of the door stone and the wall with mortar, and then brush the side of the door stone next to the floor tile with JS waterproof, and then restore the floor tiles. If the skin of the entire wall root has fallen off, it means that the waterproofing of the root of the bathroom wall is not done, or the additional layer is not done, and it is indeed more troublesome to smash the bricks of the bathroom, and there is a makeshift method to deal with it outside, shovel off the peeling paint, brush 200mm high JS, and then restore the paint and putty, but do not do the root of the wall, leave about 100mm, and stick the tile kicking, which can prevent the putty from absorbing water. If the middle of the wall falls off, the opposite bathroom should be the location of the shower area or bathtub, shovel off the wall skin, brush JS from the outside, and then restore it.

If the waterproof problem is not done well at the beginning, it is generally difficult to do it well by post-processing. You see he brushed over and over again, but waterproofing is a systematic work, not only the number of brushes, but also the treatment of the base layer, the additional layer, the circumference and the height of the shower area are very important, and the most important thing is to do the closed water test inspection after waterproofing.

There is a remedy, but it is more troublesome. The bathroom wall tiles must be knocked off, and the waterproofing must be done again, the wall is best above one meter five, and the waterproof glue must be dry to brush the second time, repeat at least three times, so as to completely solve the water seepage.

This needs to be re-done, first scrape off the rotten wall skin The last layer of Longkech waterproof paint should be painted in a large area, two to three layers, and the re-pasting tiles are good and firm, and the viscosity is very large, you can also learn a little more about the remedy, you can do a good idea, and the communication is also in aspect.