The bathroom is not paved with floor tiles, and after the floor is leveled, what should I do with th

If it is particularly deep, then the ground can only be chiseled open and the entire floor drain can be replaced. When replacing the floor drain, whether it is higher or lower than the ground level, it is necessary to pay attention to the first thing to try to measure the size, and it is best to make some corresponding preparations in advance, because once there is an unsuitable situation after installation, it is necessary to re-chisel the ground to deal with it in the later stage.

The bathroom will leave a floor drain 2 cm above the ground, remove the concrete around the floor drain in the area, and then replace it with a new floor drain.

When we close the house, we will find that the floor drain in the bathroom will be reserved very high. If we don't lay floor tiles, we should set aside a thickness higher than the floor drain when the floor is leveled. If the ground leveling has been carried out, then it is necessary to ask a professional maintenance master to repair the floor drain.

In the case of floor drainage, first figure out which mold is leaking, the area of the leakage is not large, find the gap to remedy first, and then see if it can be remedied and re-pasted with floor tiles.

I believe that many friends in the renovation are afraid that after the bathroom is paved with floor tiles, they find that the floor drain is slow? So how can we smooth the floor drain without laying floor tiles? Let me tell you about this solution.

> when we usually go to see the rough room, we will find that those bathrooms will have a floor drain 2 cm higher than the ground, in order for us to lay the floor tiles during the decoration process, so that the floor drain is a little lower than the floor level of the floor tiles, and then cover the floor drain cover is just right. Therefore, before we decorate, we should pay attention to the height of the reserved floor drain, and make the thickness of this leveling slightly higher than the reserved floor drain.

>What if we find that the floor drain is much lower after leveling the floor drain? We can use a special deep-water sealed floor drain for installation. What should I do if I find that the floor drain is much too high?

Many people will think that they will cut the reserved high floor drain pipe short, but this method will not work, because the height reserved for you is the most suitable, and if you cut it short, it will not lead to poor drainage in the bathroom, which will lose the deodorization effect of the floor drain. Then the solution is to chisel out the concrete around the floor drain in the area and replace it with a new floor drain, which saves time and effort.

> when we work hard outside for a day, how comfortable it is to be able to take a beautiful bath at home, in case the water in the bathroom can not be drained out during the bath process, and there is no mood at all, so we should find this floor drain before the decoration of the socks dry hand question, let the troubles of defeat flow away with the bath water!

This is my personal opinion and I hope it can help you.

After the ground is leveled, it is still necessary to make up the floor drain, which needs to be operated by a professional master.

The bathroom is not paved with floor tiles, and the floor must be made up after leveling.

It didn't take much time to find a worker outside, and it didn't cost much.

That can only be made up, it is recommended that you find a professional decorator to check on the spot before making a conclusion.

The floor drain should be well connected, or find a master to come to the door to get it, in case of trouble.

There is no way, this is a mistake in the decoration time, and there is no way to undo it.

Make up for it later, otherwise what can you do, you ask the master to help you get it later.